This section describes the compatibility of the hardware and software and the related configurations and preparations required for the installation.
- Installation Preparations
Obtaining the Installation Source
Before installation, obtain the openEuler Raspberry Pi image and its verification file.
Log in to the openEuler Community website.
Click the Link provided after Download ISO. The download list is displayed.
Click openEuler-20.03-LTS-SP2. The openEuler 20.03 LTS SP2 version download list is displayed.
Click Raspberry Pi. The Raspberry Pi image download list is displayed.
- aarch64: image of the AArch64 architecture
Click aarch64 to download the Raspberry Pi AArch64 image download list.
Click openEuler-20.03-LTS-SP2-raspi-aarch64.img.xz to download the openEuler Raspberry Pi image to the local PC.
Click openEuler-20.03-LTS-SP2-raspi-aarch64.img.xz.sha256sum to download the verification file of the openEuler Raspberry Pi image to the local PC.
Verifying the Image Integrity
During package transmission, to prevent software packages from being incompletely downloaded due to network or storage device problems, you need to verify the integrity of the software packages after obtaining them. Only the software packages that pass the verification can be deployed.
Compare the verification value recorded in the verification file with the verification value that is manually calculated to determine whether the software package is complete. If the two values are the same, the downloaded file is complete. Otherwise, the downloaded file is incomplete and you need to obtain the software package again.
Before verifying the integrity of the image file, ensure that the following files are available:
Image file: openEuler-20.03-LTS-SP2-raspi-aarch64.img.xz
Verification file: openEuler-20.03-LTS-SP2-raspi-aarch64.img.xz.sha256sum
To verify the file integrity, perform the following procedure:
Obtain the verification value from the verification file. Run the following command:
$ cat openEuler-20.03-LTS-SP2-raspi-aarch64.img.xz.sha256sum
Calculate the SHA256 verification value of the file. Run the following command:
$ sha256sum openEuler-20.03-LTS-SP2-raspi-aarch64.img.xz
After the command is executed, the verification value is displayed.
Check whether the verification value calculated in step 1 is consistent with that calculated in step 2.
If the verification values are consistent, the downloaded file is not damaged. Otherwise, the downloaded file is incomplete and you need to obtain the file again.
If the openEuler operating system is installed in the Raspberry Pi environment, the Raspberry Pi environment must meet the hardware compatibility and minimum hardware specifications as follows.
Currently, the openEuler Raspberry Pi image supports the 3B, 3B+, and 4B versions.
Minimum Hardware Specifications
Table 1 lists the minimum hardware specifications for the openEuler Raspberry Pi image.
Table 1 Minimum hardware specifications