Appendix

Appendix
- Command Line Parameters
- CNI Parameters

Command Line Parameters

Table 1 login command parameters

Command	Parameter	Description
login	-H, --host	Specifies the iSulad socket file path to be accessed.
	-p, --password	Specifies the password for logging in to the registry.
	--password-stdin	Specifies the password for obtaining the registry from standard input.
	-u, --username	Specifies the username for logging in to the registry.

Table 2 logout command parameters

Command	Parameter	Description
logout	-H, --host	Specifies the iSulad socket file path to be accessed.

Table 3 pull command parameters

Command	Parameter	Description
pull	-H, --host	Specifies the iSulad socket file path to be accessed.

Table 4 rmi command parameters

Command

Parameter

Description

rmi

-H, --host

Specifies the iSulad socket file path to be accessed.

-f, --force

Forcibly removes an image.

Table 5 load command parameters

Command	Parameter	Description
load	-H, --host (supported only by iSula)	Specifies the iSulad socket file path to be accessed.
	-i, --input	Specifies where to import an image. If the image is of the docker type, the value is the image package path. If the image is of the embedded type, the value is the image manifest path.
	--tag	Uses the image name specified by TAG instead of the default image name. This parameter is supported when the type is set to docker.
	-t, --type	Specifies the image type. The value can be embedded or docker (default value).

Table 6 images command parameters

Command

Parameter

Description

images

-H, --host

Specifies the iSulad socket file path to be accessed.

-q, --quit

Displays only the image name.

Table 7 inspect command parameters

Command	Parameter	Description
inspect	-H, --host	Specifies the iSulad socket file path to be accessed.
	-f, --format	Outputs using a template.
	-t, --time	Timeout interval, in seconds. If the inspect command fails to query container information within the specified period, the system stops waiting and reports an error immediately. The default value is 120s. If the value is less than or equal to 0, the inspect command keeps waiting until the container information is obtained successfully.

CNI Parameters

Table 1 CNI single network parameters

Parameter	Type	Mandatory or Not	Description
cniVersion	string	Yes	CNI version. Only 0.3.0 and 0.3.1 are supported.
name	string	Yes	Network name, which is user-defined and must be unique.
type	string	Yes	Network type. The following types are supported: underlay_ipvlan overlay_l2 underlay_l2 vpc-router dpdk-direct phy-direct
ipMasq	bool	No	Configures the IP masquerade.
ipam	structure	No	For details, see the IPAM parameter definition.
ipam.type	string	No	IPAM type. The following types are supported: (1) For underlay_l2, overlay_l2, and vpc-router networking, only the default value distributed_l2 is supported. (2) For underlay_ipvlan networking, the default value is distributed_l2. In the CCN scenario, only null and fixed are supported. In the CCE and FST 5G core scenarios, only null and distributed_l2 are supported. (3) For phy-direct and dpdk-direct networking, the default value is l2, and optional values are null and distributed_l2. In the FST 5G core scenario, only null and distributed_l2 are supported. Description: If the value is out of the range (for example, host-local), Canal automatically sets the value to the default value and no error is returned. null: Canal is not used to manage IP addresses. fixed: fixed IP address, which is used in the CCN scenario. l2: This value is not used in any scenario. distributed_l2: The distributed small subnet is used to manage IP addresses.
ipam.subnet	string	No	Subnet information. Canal supports the subnet mask ranging from 8 to 29. The IP address cannot be a multicast address (for example, 224.0.0.0/4), reserved address (240.0.0.0/4), local link address (169.254.0.0/16), or local loop address (127.0.0.0/8).
ipam.gateway	string	No	Gateway IP address.
ipam.range-start	string	No	Available start IP address.
ipam.range-end	string	No	Available end IP address.
ipam.routes	structure	No	Subnet list. Each element is a route dictionary. For details, see the route definition.
ipam.routes.dst	string	No	Destination network.
ipam.routes.gw	string	No	Gateway address.
dns	structure	No	Contains some special DNS values.
dns.nameservers	[]string	No	NameServers
dns.domain	string	No	Domain
dns.search	[]string	No	Search
dns.options	[]string	No	Options
multi_entry	int	No	Number of IP addresses required by a vNIC. The value ranges from 0 to 16. For physical passthrough, a maximum of 128 IP addresses can be applied for a single NIC.
backup_mode	bool	No	Active/Standby mode, which is used only for phy-direct and dpdk-direct networking.
vlanID	int	No	The value ranges from 0 to 4095. It can be specified through PaaS.
vlan_inside	bool	No	The value true indicates that the VLAN function is implemented internally on the node, and the value false indicates that the VLAN function is implemented externally.
vxlanID	int	No	The value ranges from 0 to 16777215. It can be specified through PaaS.
vxlan_inside	bool	No	The value true indicates that the VLAN function is implemented internally on the node, and the value false indicates that the VLAN function is implemented externally.
action	string	No	This parameter can be used only with the special container ID 000000000000. Create: creates a network. Delete: deletes a network.
args	map[string]interface{}	No	Key-value pair type.
runtimeConfig	structure	No	None
capabilities	structure	No	None

Table 2 CNI args parameters

Parameter	Type	Mandatory	Description
K8S_POD_NAME	string	No	Set this parameter when you apply for a fixed IP address (runtimeConfig.ican_caps.fixed_ip is set to true).
K8S_POD_NAMESPACE	string	No	Set this parameter when you apply for a fixed IP address (runtimeConfig.ican_caps.fixed_ip is set to true).
SECURE_CONTAINER	string	No	Secure container flag.
multi_port	int	No	The value ranges from 1 to 8. The default value is 1. Specifies the number of passthrough NICs. Only phy-direct and dpdk-direct networks are supported.
phy-direct	string	No	Specifies the NIC to be connected when you create an SR-IOV container network.
dpdk-direct	string	No	Specifies the NIC to be connected when you create a DPDK passthrough container network.
tenant_id	string	No	Indicates the tenant ID. Only vpc-router networks are supported.
vpc_id	string	No	VPC ID. Only vpc-router networks are supported.
secret_name	string	No	Specifies the AK/SK object name on the K8S APIServer. Only vpc-router networks are supported. For details, see the configuration of VPC-Router logical networks.
IP	string	No	IP address specified by the user, in the format of 192.168.0.10.
K8S_POD_NETWORK_ARGS	string	No	Specifies an IP address, in the format of 192.168.0.10. If both IP and K8S_POD_NETWORK_ARGS in args are not empty, the value of K8S_POD_NETWORK_ARGS prevails.
INSTANCE_NAME	string	No	INSTANCE ID. Refer to fixed IP addresses that support containers.
dist_gateway_disable	bool	No	The value true indicates that no gateway is created, and the value false indicates that a gateway is created.
phynet	string or []string	No	Specifies the name of the physical plane to be added. The physical plane name is predefined and corresponds to that in the SNC system. When two plane names are entered, the active and standby planes are supported. Example: phy_net1 or ["phy_net2","phy_net3"]
endpoint_policies	struct	No	"endpoint_policies": [ { "Type": "", "ExceptionList": [ "" ], "NeedEncap": true, "DestinationPrefix": "" } ]
port_map	struct	No	On a NAT network, container ports can be advertised to host ports. "port_map": [ { "local_port": number, "host_port": number, "protocol": [string...] }... ]

Table 3 CNI multiple network parameters

Parameter	Type	Mandatory	Description
cniVersion	string	Yes	CNI version. Only 0.3.0 and 0.3.1 are supported.
name	string	Yes	Network name, which is user-defined and must be unique.
plugins	struct	Yes	For details, see CNI single network parameters

Appendix

Command Line Parameters

CNI Parameters

Bug Catching

Buggy Content

Bug Description

How satisfied are you with this document