Resolved Issues
For the complete issue list, see Issues.
For the complete list kernel related commits, see Commits.
For details about resolved issues, see Table 1.
| Issue | Repository | Description |
|---|---|---|
| I4ZNTK | A-FOT | [22.03 LTS] Redundant bin_file check in the a-fot script of the a-fot tool. |
| I4VUK0 | digest-list-tools | openEuler-22.03 does not support adding extended attributes to the summary list. |
| I4TZ8B | docs | The description of the password complexity setting module in the official document needs to be optimized. |
| I4VSDZ | gcc | [22.03 LTS] -fprefetch-loop-arrays=2 -O3 compilation ICE: during GIMPLE pass: aprefetch tree-ssa-loop-prefetch.c:2322 |
| I4XPLH | gcc | [22.03 LTS] asan: leakage occurs during the npb test. |
| I4XEK0 | imageTailor | [kiwi] After the eulerversion field in the isopackage.sdf file is modified, the file is forcibly restored after tailoring. |
| I4UTFN | isula-build | When SELinux is enabled, isula-build fails. |
| I4T2WV | kernel | An exception occurs when the shared directory is full on the NFS server. |
| I4TC35 | kernel | [openEuler22.03] [Arm/x86] LTP fails to execute the proc01 case. |
| I4TI1I | kernel | [openEuler22.03] [Arm/x86] LTP fails to execute the mkfs01_ext3_sh and mkfs01_ext4_sh cases. |
| I4U6WB | kernel | [openEuler 22.03] [Arm] LTP fails to execute the sctp01 and sctp01_ipv6 cases. |
| I4UBDC | kernel | [openEuler-22.03-LTS] The crash tool cannot parse kcore. |
| I4UCEQ | kernel | [OLK-5.10] pinmemory is added to the startup parameters, but the memory size and start address are not specified. As a result, the system fails to be started. |
| I4UHKD | kernel | [openEuler22.03] After syzkaller runs for half a minute, the lost connection to test machine error is reported and the URL is disconnected. |
| I4UZA3 | kernel | [openEuler-22.03-LTS] A build ID error is displayed when using perf probe to parse the debug kernel. |
| I4V7IK | kernel | [openEuler 22.03] When the generic/475 case of xfstest is tested in the XFS file system, a BUGON occurs. |
| I4VDPT | kernel | After slab is created and an object is applied for, the register_shirnker function is invoked to reclaim the function. As a result, slab is not properly reclaimed. |
| I4VN3F | kernel | [openEuler 22.03] The general protection fault in bond_change_active_slave error is found in the x86 syzkaller environment. |
| I4VUFS | kernel | When the etmem start command is executed for the first time in the new environment, a warning call trace message is displayed. |
| I4VZPC | kernel | An error is reported when the driver of NVIDIA A100 is installed in the 22.03-LTS environment. |
| I4X2JA | kernel | [openEuler 22.03-RC3] [Arm] The read-only segment has dynamic relocations error is reported when the syzkaller is being compiled. |
| I4XAGK | kernel | [openEuler 22.03-RC3] [Arm64] In the AArch64 architecture, when the Avago SP150IT-M RAID controller card is used to install the OS, the installation enters the PXE mode. |
| I4XAJ7 | kernel | [openEuler 22.03-RC3] [Arm64] In the AArch64 architecture, the Avago SR430C-M RAID controller card cannot be identified on the installation screen. |
| I4ZYUH | kernel | [22.03-RC5] [Arm/x86] After kernel-rt is installed, the system cannot be restarted. |
| I4U94T | nvwa | [Arm] [22.03] Kernel upgrade fails after quick_kexec pin_memory is enabled. |
| I4UCF4 | nvwa | [Arm] [22.03] pinmemory is added to the startup parameters, but the memory size and start address are not specified. As a result, the system fails to be started. |
| I4V658 | nvwa | [Arm] [22.03] nvwa fails to restore the process during the kernel live upgrade. |
| I4V644 | nvwa | [Arm] [22.03] criu cannot use the --pin-memory parameter. |
| I4V800 | openeuler-obs | [22.03-LTS] [x86/Arm] The qcow2 file fails to start, and the login page cannot be displayed. |
| I4WQKN | openstack | OpenStack train installation test. |
| I4WX97 | openstack | [22.03 LTS] [Train] [Aodh] The default port conflicts with heat. |
| I4WZM8 | openstack | [22.03-LTS] [Train] [Wallaby] [Glance] [Aodh] The mainline httplib2 and pyparsing versions do not meet the requirements. |
| I4X6EX | openstack | [22.03-LTS] [Wallaby] [Keystone] [Placement] The dependency package python3-sphinx-feature-classification is missing. |
| I4ZG8R | openstack | [22.03] [Train] [Wallaby] The gpgkey configuration of openstack-release is incorrect. |
| I4ZNW3 | openstack | [22.03-LTS] [Wallaby] [Train] python-magnumclient and python-fastavro fail to be built occasionally. |
| I4WQV0 | accumulo | [22.03-RC3-Arm/x86] Add the dependency package to the dependency list when using the 2203RC3_epol source to install accumulo. |
| I4UIYX | ant | [22.03-RC1] [x86/Arm] The ant source package fails to be built locally due to lack of compilation dependency. |
| I4U4W5 | A-Tune | A-tune does not inherit the functions of the 20.03-LTS-SP3 version. |
| I4VU9F | avahi | [22.03-RC2] [Arm/x86] The avahi service starts successfully, but the nss-mdns command fails to ping hostname**.local**. A message is displayed, indicating that the name or service is unknown. |
| I4VESA | blackbox_exporter | [22.03-RC2-Arm/x86] After blackbox_exporter packages are installed using source 2203 LTS_epol_round2, the installation fails due to lack of dependency packages. |
| I4VD58 | booth | [22.03 LTS-RC2] [Arm/x86 ] booth-arbitrator.service fails to start. |
| I4VD67 | booth | [22.03 LTS-RC2] [Arm/x86 ] Error message Failed to stop booth@.service: Unit name booth@.service is missing the instance name is displayed when the booth-arbitrator package is uninstalled. |
| I4UOSK | ceph | [22.03-LTS-Arm/x86] After ceph packages are successfully installed using source 2203 LTS_epol_round2, a large number of alarms are generated. |
| I4UM59 | classloader-leak-test-framework | [22.03-RC1] [x86/Arm] The classloader-leak-test-framework source package failed to be built locally due to the failure in downloading the classloader-leak-test-framework:jar:1.1.1. |
| I4SJG0 | coreutils | The returned value of timeout is incorrect. The correct value is 137. |
| I4WZBS | corosync | [22.03 LTS-RC3] [Arm/x86] The corosync.service and corosync-notifyd.service fail to be started because the pcs package is not submitted for test. |
| I4WZDJ | corosync-qdevice | [22.03 LTS-RC3] [Arm/x86] The corosync-qdevice.service and corosync-qnetd.service fail to be started because the pcs package is not submitted for test. |
| I4VUFJ | cppcheck | [openEuler_22.03_LTS-round-2] The --force parameter in the command in the cppcheck package does not take effect. |
| I4VSS3 | custodia | [22.03-RC2] [Arm/x86] An exception occurs during the installation and uninstallation of the custodia package. |
| I4USJN | dbus-broker | [22.03-RC1-LTS-Arm/x86] After dbus-broker is installed using source 2203 LTS_everything_round1 and uninstalled, the networkmanager service is disabled. As a result, the host has no ip address. |
| I4VESN | dde | [22.03-RC2-arm/x86] After the source 2203 LTS_epol_round2 is used to install dde packages, the installation fails due to lack of dependency packages. |
| I4XXXA | dde | [openEuler-22.03-LTS Test round 4] [x86/Arm] The desktop environment fails to be accessed after the dde is installed. |
| I4WQRW | dde-daemon | [22.03-RC3-Arm/x86] When the 2203RC3_epol source is used to install dde-daemon, the deepin-daemon.conf file is missing. |
| I4WXX1 | dde-dock | [openEuler-22.03-LTS Test round 3] [x86/Arm] [Taskbar] The taskbar is on the top after a restart. |
| I4X0VC | dde-introduction | [openEuler-22.03-LTS Test round 3] [x86] [Welcome] The welcome application cannot be started properly. |
| I4WQDW | deepin-default-settings | [22.03-RC3-Arm/x86] When the 2203RC3_epol source is used to install deepin-default-settings, the deepin.conf file is missing, and a large number of alarms are generated during the installation. |
| I4XUGF | deepin-default-settings | [22.03-RC4-Arm/x86] When the 22.03RC4_epol source is used to install deepin-default-settings, the script fails to be executed because it is affected by another user (ovirt). |
| I4X0QG | deepin-devicemanager | [openEuler-22.03-LTS Test round 3] [x86/Arm] The device manager fails to be opened. |
| I4U8N3 | dhcp | [22.03-RC1-LTS-Arm/x86] DHCP problem: after the 2203 LTS_everything_round1 source is used, the IP address is lost two hours after the installation, restart, or uninstallation. |
| I4VCVP | diffutils | When the contents of the three files are different, the outputs of the diff3 -x and diff -x commands are the same, which does not meet the expectation. |
| I4XKVM | digest-list-tools | All linux capabilities cannot be parsed for digest list in openEuler-22.03. |
| I4SIMU | dmidecode | The dmidecode --compat-uuid command does not exist, but the patch exists. the spec file is incorrect. |
| I4UTDM | dmidecode | The dmidecode -u segment error occurs. |
| I4UK49 | dovecot | [22.03 LTS] [x86] The dovecot-sysreport command fails to be executed. |
| I4WP3N | dwz | [22.03-RC3] [Arm/x86] The dwz source package fails to be compiled locally because the compilation dependency package gdb is missing. |
| I4W24D | e2fsprogs | [22.03-RC2] [Arm/x86] The the e2fsprogs source package fails to be built locally, and two test cases fail to be executed. |
| I4WXCH | e2fsprogs | The fsck is suspended and cannot be stopped when a drive is faulty. |
| I4WW2P | eclipse | [22.03-RC3] [Arm/x86] The eclipse source package fails to be built locally. |
| I4ZD1D | efibootmgr | [2203-LTS] The efibootmgr -v command fails to be executed. |
| I4U4TW | etmem | The 22.03-LTS version of the etmem component does not inherit the functions of 20.03-LTS-SP3. |
| I4VYRM | fcoe-utils | [22.03-RC2] [Arm/x86] The fcoe-utils source package fails to be built locally. |
| I4WNZ9 | fftw | [22.03-RC3] [Arm/x86] The fftw source package fails to be built locally. |
| I4VDAJ | findutils | [22.03-RC2] [Arm/x86] The findutils source package fails to be built locally, and the test case fails to be executed. |
| I4WNTU | firebird | [22.03 LTS-RC3] [Arm/x86] After firebird-superserver.service is started, the message Can't open PID file /run/firebird/default.pid is displayed in the logs. |
| I4U8QI | firewalld | The drop rule configured on firewalld does not take effect. |
| I4U95S | firewalld | The get-log-denied configuration does not take effect. |
| I4VESD | freeimage | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install freeimage packages, the installation fails due to lack of dependency packages. |
| I4WN0I | gazelle | Three gazelle user-mode threads are configured on the server. The client establishes 20 connections to send traffic. During traffic sending, the server is restarted. Two minutes after the restart, the number of connections exceeds the number before the restart. |
| I4WXI4 | gazelle | When ltran and lstack are configured and the redis service is started, the client redis-benchmark cannot be pinged. |
| I4WXIS | gazelle | When ltran and lstack are configured and the redis service is started, lstack fails to be queried by running the gazellectl command. |
| I4WXKU | gazelle | When ltran and lstack are configured and the memory configured for lstack is less than the memory required for running, a core dump occurs when the redis service is started. |
| I4Y5OI | gazelle | When the benchmark service is running, if you delete the dpdk intermediate file, restart ltran, and then start the benchmark service, a core dump occurs occasionally. |
| I4YC8D | gazelle | After the redis cluster service is configured, the client writes data to the master redis node. the data on the slave node is not synchronized. |
| I4X60Y | gazelle | When ltran and lstack are configured and the redis service is started, the number of concurrent redis-benchmark requests on the client does not reach the expected value. |
| I4XDEQ | gazelle | Two gazelle user-mode threads are configured on the server. When the gazelle directory in /var/run/dpdk is deleted during traffic generation on the client, a core dump occurs. |
| I4XE0P | gazelle | Two gazelle user-mode threads are configured on the server. When the client sends traffic, the gazellectl lstack show ip -l command is executed. No ltran statistics are found. |
| I4XF1T | gazelle | When 20 gazelle user-mode threads are configured on the server and the client sends traffic concurrently, a core dump occurs. |
| I4XHLP | gazelle | The number of CPU cores configured on the server is an odd number. As a result, the benchmark service fails to be started. |
| I4XLDV | gazelle | (For lstack thread model only) the benchmark client repeatedly sends traffic and then terminates. Connections in CLOSE_WAIT and ESTABLISHED states exist on the server for a long time, and new connections cannot be created. |
| I4XQQF | gazelle | (For lstack thread model only) after the benchmark client continuously sends traffic for a period of time, a core dump occurs on the server. |
| I4XQTY | gazelle | (For lstack thread model only) the core binding of the wakeup thread is inconsistent with the configuration. |
| I4Y7W7 | gazelle | The benchmark client is concurrently connected to 5000 clients. After the server is restarted repeatedly, it takes a long time to set up the connections again. |
| I4VS1R | gdbm | [22.03-RC2] [x86] An alarm is generated when the gdbm-devel package is installed or uninstalled. |
| I4UJ8T | gdm | [22.03 LTS-RC1] [Arm/x86] After gdm.service is started, an error is reported in the logs. |
| I4VESR | gigolo | [22.03-RC2-Arm/x86] After gigolo packages are installed using source 2203 LTS_epol_round2, the installation fails due to lack of dependency packages. |
| I4SFLZ | glibc | The CVE-2019-1010023 patch is not integrated in 22.03. |
| I4UA4W | glibc | The performance of Unixbench Dhrystone_2_using_register_variables in 22.03 (glibc-2.34) deteriorates compared with that of 20.03(glibc-2.28). it is preliminarily determined that the problem is caused by different glibc versions. |
| I4XZSH | glusterfs | [22.03-RC4] [Arm/x86] When glusterfs and NFS are used together, an error message mount.nfs: requested NFS version or transport protocol is not supported is displayed when nfs is used to mount the distributed volume created by glusterfs. |
| I4BXS3 | gnome-boxes | gnome-boxes cannot create VMs. |
| I4VPRS | gnome-builder | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install gnome-builder packages, the installation fails due to lack of dependency packages. |
| I4WBX1 | gnome-calendar | [22.03 LTS-RC2] [x86_64/AArch64] When the gnome-calender is started, the normal startup and core dump occur alternately. |
| I4WCOA | gnome-control-center | [22.03 LTS-RC2] [AArch64] The exchange of the left and right keys of the Mouse & Touched mouse under gnome-control-center (settings) is invalid. |
| I4UTJ0 | gnome-music | [22.03 LTS-RC1] [Arm/x86 ] Failed to open gnome-music. |
| I4WV3U | gnome-themes-standard | [22.03-RC3] [Arm/x86] Failed to compile the gnome-themes-standard source package locally. configure: error: Could not find gtk-update-icon-cache is displayed. |
| I4ZOGY | gnome-tweaks | [22.03-RC5-arm/x86] After the source 2203 LTS_epol_round5 is used to install the gnome-tweaks packages, the installation fails due to the lack of dependency packages. |
| I4RT8R | grep | If multiple -f - parameters are configured for grep, the standard input is read only once. |
| I4ULEB | grub2 | When the file system is abnormal, grub-boot-success.service writes files in the EFI partition, which may damage the partition. Therefore, it is recommended that grub-boot-success.service be disabled by default. |
| I4VDM7 | grub2 | [22.03-LTS] [Arm] After the physical machine is installed, an error is reported when the physical machine is restarted. |
| I4UKER | HikariCP | [22.03-RC1] [x86/Arm] The HikariCP source package fails to be built locally due to lack of compilation dependency. |
| I4VZPK | hiredis | [fuzz] hiredis --sanitizer address AddressSanitizer: attempting double-free |
| I4RYEN | httpd | Run the httpd -t command. The AH01574: module socache_memcache_module is already loaded, skipping alarm is displayed. |
| I4YJTW | i40e | The i40e single package does not synchronize the kernel UAF patch. |
| I4U8XD | ImageMagick | [openEuler_22.03_LTS-round-1] An Error is reported when executing commands in the ImageMagick package. |
| I4UMBX | initial-setup | [22.03 LTS-RC1] [Arm/x86] The initial-setup service fails to be started, and the error message ModuleNotFoundError: No module named 'pyanaconda.users is displayed. |
| I4SJM8 | iptables | A core dump occurs when the iptables command is executed. |
| I4UDWH | iptables | [22.03 LTS-RC1] [Arm/x86] After the iptables.service and ip6tables.service are stopped, error message is recorded in the logs. |
| I4RUCH | iputils | After -c is specified for the arping command, the returned value is not 0. |
| I4SPHJ | iputils | The returned value of arping -s -w is not 0. |
| I4SPLW | iputils | During the ping6 process, if the network is intermittently disconnected, no information is displayed during the network disconnection. It is expected that information is displayed. |
| I4V9XE | iSulad | The pod network is successfully configured when has_linux is not configured. |
| I4VWOU | javapackages-tools | [openEuler_22.03_LTS-round-2] An error is reported during command execution because the dependency package libdb is missing during javapackages-tools package installation. |
| I4UJ0Z | jboss-remoting-jmx | [22.03-RC1] [x86/Arm] The jboss-remoting-jmx source package fails to be built locally due to lack of compilation dependency. |
| I4W2RK | jemalloc | [22.03-RC2] [Arm/x86] When jemalloc and php are used together, after the jemalloc dynamic library is loaded using LD_PRELOAD and php-fpm is executed, the following error message is displayed: free(): invalid pointer has been discarded (the core has been dumped). |
| I4W2Y7 | jemalloc | [22.03-RC2] [Arm/x86] When jemalloc and mysql are used together, jemalloc does not take effect after the jemalloc dynamic library is loaded using LD_PRELOAD. |
| I4UJU5 | joni | [22.03-RC1] [x86/Arm] The joni source package fails to be built locally. |
| I4XYEJ | kata_integration | [22.03-RC4] [x86] The kata-containers source package fails to be built locally. |
| I4WWH4 | kernel | In the 1822 NIC environment, traffic is sent and the nic is repeatedly powered on and off or hot swapped. After a period of time, the system crashes. |
| I4WXF2 | kernel | In the HiSi NIC environment, calltrace exceptions occur during system startup. |
| I4WYBZ | kernel | The system crashes after a period of time when traffic is sent to the bond and nic faults are injected. |
| I4X3VO | kernel | When the httpd service is deployed on the network to send a large number of packets, the system crashes after a warning is generated in selinux. |
| I4XB7L | kernel | nf_conntrack_tcp_packet panic occurs when traffic is sent to the 1822 NIC and the NIC is hot swapped. |
| I4SRS9 | kexec-tools | [openEuler-22.03 LTS] Incomplete crash logs after a panic occurs. |
| I4VRZQ | kiran-calculator | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install the kiran-calculator package, the script fails to be executed in the post phase with an exit code 127. |
| I4VSQT | kiran-cc-daemon | [22.03-RC2-arm/x86] After the source 2203 LTS_epol_round2 is used to install the kiran-cc-daemon package, multiple warning messages are displayed. |
| I4VRWW | kiran-cpanel-account | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install the kiran-cpanel-account package, the script fails to be executed in the post phase with an exit code 127. |
| I4VRLI | kiran-cpanel-appearance | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install the kiran-cpanel-appearance package, the script fails to be executed in the post phase with an exit code 127. |
| I4VRMJ | kiran-cpanel-display | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install the kiran-cpanel-display package, the script fails to be executed in the post phase with an exit code 127. |
| I4VRO5 | kiran-cpanel-keybinding | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install the kiran-cpanel-keybinding package, the script fails to be executed in the post phase with an exit code 127. |
| I4VRQN | kiran-cpanel-keyboard | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install the kiran-cpanel-power package, the script fails to be executed in the post phase with an exit code 127. |
| I4VRRO | kiran-cpanel-mouse | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install the kiran-cpanel-mouse package, the script fails to be executed in the post phase with an exit code 127. |
| I4VRSJ | kiran-cpanel-power | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install the kiran-cpanel-power package, the script fails to be executed in the post phase with an exit code 127. |
| I4VRYE | kiran-cpanel-timedate | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install the kiran-cpanel-timedate package, the script fails to be executed in the post phase with an exit code 127. |
| I4VESX | kiran-desktop | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install kiran-desktop packages, the installation fails due to lack of dependency packages. |
| I4WLMK | kiran-desktop | Dark theme is not completely applied to the window. |
| I4WLSQ | kiran-desktop | Cursor themes and dark/light themes do not take effect on self-developed components. |
| I4WLZE | kiran-desktop | The System and Auxiliary groups in the shortcut key settings are empty. |
| I4WM37 | kiran-desktop | When the Traceroute and Terminal windows are opened, the same icon is used in the taskbar. |
| I4WM54 | kiran-desktop | File manager in the taskbar cannot be started after logging in to the desktop using the root user. |
| I4WMVA | kiran-desktop | There is no input method icon on the right of the taskbar. |
| I4WN0A | kiran-desktop | The caja program in the Start menu cannot be started. |
| I4WN6W | kiran-desktop | The File Management program in the Start menu cannot be started. |
| I4WN8E | kiran-desktop | The fcitx program in the Start menu cannot be started. |
| I4WNB8 | kiran-desktop | After starting the Run Command program and select Run in Terminal, the terminal window and the run command window exit unexpectedly. |
| I4WNDR | kiran-desktop | The Search for Files program cannot be started. |
| I4WO7L | kiran-desktop | The Home Directory program on the left panel of the Start menu cannot be started. |
| I4WOFG | kiran-desktop | After logging in to the desktop as the root user and change the icon theme, the new theme does not take effect immediately. You need to restart the system for the new theme to take effect. |
| I4WON7 | kiran-desktop | The position of the cursor in the terminal is misaligned with the text content. |
| I4WOQM | kiran-desktop | The shortcut for screen capture does not work even after modification. |
| I4WORW | kiran-desktop | The shortcut for window capture does not work even after modification. |
| I4XJZK | kiran-desktop | [22.03-RC4-Arm/x86] Failed to commit changes to dconf is displayed after kiran-desktop packages are installed using source 2203 LTS_epol_round2. |
| I4VS8R | kiran-screensaver | [22.03-RC2-Arm/x86] Multiple warning messages are displayed after kiran-screensaver packages are installed using source 2203 LTS_epol_round2. |
| I4WQSG | kmod-kvdo | [22.03-RC3-Arm/x86] Use the 2203rc3_epol Source to install kmod-kvdo. The installation output information must comply with the specifications. |
| I4WNZ7 | krb5 | [22.03 LTS-RC3] [Arm/x86] After thkrb5kdc.service is started, Can't open PID file /run/krb5kdc.pid is displayed in the logs. |
| I4RU8Q | ksh | When ksh processes a path that does not exist, the message builtin: xyz: not found is displayed. |
| I4U4N0 | KubeOS | KubeOS is not integrated into the epol source of the AArch64 architecture. |
| I4VSCM | KubeOS | [22.03 x86] When the generate.sh script is executed to create an image, an error message is displayed indicating that the boot space is insufficient. |
| I4VT11 | KubeOS | [22.03 Arm]The sshd service fails after the VM image created using the generate.sh script is started. |
| I4W9JM | kylin-music | [2203-LTS-Arm/x86] Branch 22.03 compilation failure. |
| I4UKQN | ldaptive | [22.03-RC1] [x86/Arm] The ldaptive source package fails to be built locally due to lack of compilation dependency. |
| I4UE9O | libcareplus | [22.03 LTS-RC1] [Arm/x86] Failed to start the libcare.service. |
| I4UUPJ | LibRaw | [fuzz] libraw --sanitizer memory use-of-uninitialized-value |
| I4UV8I | LibRaw | [fuzz] libraw --sanitizer memory use-of-uninitialized-value |
| I4UVNR | LibRaw | [fuzz] libraw --sanitizer undefined UndefinedBehaviorSanitizer |
| I4UWNG | LibRaw | [fuzz] libraw --sanitizer undefined UndefinedBehaviorSanitizer |
| I4V1KH | libsass | [fuzz] libsass --sanitizer address libsass LeakSanitizer: detected memory leaks |
| I4WOGC | libwbxml | [22.03-RC3] [x86] The libwbxml source package fails to be built locally, and most test cases fail. |
| I4VRVE | lightdm-kiran-greeter | [22.03-RC2-Arm/x86] After the lightdm-kiran-greeter package is installed using the source 2203 LTS_epol_round2, the script fails to be executed in the post phase with an error code 127. |
| I4UE6O | lighttpd | [22.03 LTS-RC1] [Arm/x86] lighttpd.service fails to be started, and the error information opening pid-file failed: /run/lighttpd/lighttpd.pid: N o such file or directory is recorded in the logs. |
| I4J11Q | linux-firmware | The linux-firmware package can be tailord to reduce the size of install.img and ISO files by about 10 MB. |
| I4UQYC | llvm | [22.03-RC1-LTS-Arm/x86] After LLVM is installed and uninstalled, an alarm is reported, indicating that /sbin/ldconfig: /usr/lib64/libLLVM-10.so is not a symbolic link. |
| I4WV9B | log4j | [22.03-RC3] [Arm/x86] The log4j source package fails to be built locally. |
| I4UCZK | lvm2 | [22.03lts] Failed to modify the RAID logical volume attribute. |
| I4Y5CY | lxc | [22.03 LTS-RC4] [Arm/x86 ] An error is reported during the execution of the lxc-create -t busybox -n myhost Command. As a result, the log contains failure information after lxc.service is started. |
| I4WNJP | m4 | [22.03-RC3] [Arm] The m4 source package fails to be compiled locally, and the test-localeconv cases fail. |
| I4VDS3 | mailman | [22.03 LTS-RC2] [Arm/x86 ] Failed to start the mailman3.service. |
| I4U1VB | mariadb | [22.03-lts] MariaDB fails to be installed due to missing dependencies. |
| I4UL6Y | maven-native | [22.03-RC1] [x86/Arm] The maven-native source package fails to be built locally due to lack of compilation dependency. |
| I4UBM0 | mpg123 | [22.03 LTS] [x86] Failed to run the mpg123 mess.mp3 command. |
| I4U96O | mysql | [22.03-RC1] [Arm/x86] mysql-selinux dependency is missing during mysql-server installation. |
| I4WLJC | netty | [22.03-RC3] [Arm/x86] The netty source package fails to be built locally because the compilation dependency package is missing. |
| I4VRCL | nodejs | [22.03-RC2] [Arm] The node.js source package fails to be built locally. |
| I4XJYF | novnc | [22.03-RC4-Arm/x86] When installing noVNC packages using source 2203 LTS_epol_round2, the installation fails due to lack of dependency packages. |
| I4VWNZ | nss-mdns | [22.03-RC2] [Arm/x86] Failed to ping host_name**.local** using the nss-mdns command, and a message is displayed indicating that the name or service is unknown. |
| I4SGC0 | numactl | A codedump error is reported when running the numactl --offset=4096 --length=64k --file /dev/shm/A --membind=0 --touch command. |
| I4ZUVH | obs-server | [22.03 LTS] An alarm is generated when obs-api is directly installed on 22.03 RC6. |
| I4U5CQ | oemaker | oemaker needs to be inherited from the 20.03-SP3 branch. |
| I4UE2W | oemaker | [22.03-LTS] The USB flash drive containing the x86_64 ISO image cannot be identified during startup. As a result, the installation page cannot be displayed. |
| I4UOI0 | oemaker | In the edge scenario, the ISO file has only the minimum installation option, and important packages such as kubeedge are not installed. |
| I4VPNN | oemaker | oemaker is not restored after setenfore 0 is set. |
| I4UJ48 | openal-soft | [22.03-RC1] [x86/Arm] The openal-soft source package fails to be built locally due to lack of compilation dependency. |
| I4T3R3 | opengauss-dcf | [22.03-LTS] An error is reported during opengauss installation. |
| I4UAEH | openssh | SSH agent forwarding is not controlled by AllowAgentForwarding. |
| I4UCVL | openssh | [22.03lts] When logging in using the password after the login mode is changed to key, the returned value is 255. |
| I4VDY5 | openstack-releases | [22.03-RC2-LTS-arm/x86] A source that is temporarily unavailable is generated after installing openstack-release-train and openstack-release-wallaby packages using source 2203 LTS_os_round2. |
| I4XUJM | ovirt-vmconsole | [22.03-RC4-arm/x86] User ovirt-vmconsole is not deleted after the ovirt-vmconsole packages are installed using source 22.03 LTS_epol_round4 and uninstalled. |
| I4WZ6U | pacemaker | [22.03 LTS-RC3] [Arm/x86] pacemaker.service fails to be started because the pcs package is not tested. |
| I4UAX3 | patch-tracking | [22.03-RC1-LTS-Arm/x86] patch-tracking is successfully installed using source 2203 LTS_everything_round1, but the uninstallation fails. |
| I4U4AM | pcp | [22.03 LTS-RC1] [Arm/x86 ] pmie.service is in the failed state after being stopped. |
| I4ULLR | pcp | [openEuler_22.03_LTS-round-1] An error is reported when the pcp-pidstat command in the pcp-system-tools package is executed. |
| I4VE4N | pcp | [22.03 LTS-RC2] [Arm/x86] pmlogger.service fails to be started and remains in the activating status. |
| I4X018 | pcp | [22.03-LTS-round3-x86/aarch64] An error is reported when the pmlogger service status is checked after the pcp package is installed. |
| I4Y677 | podman | When umask is set to 0077, podman fails to start the postgres container. |
| I4VEI6 | postfix | [22.03 LTS-RC2] [Arm/x86] After postfix.service is started, the error message failed to get attributes of '/etc/aliases.db': No such file or directory is displayed in the logs. |
| I4VEIS | postfix | [22.03 LTS-RC2] [Arm/x86] The newaliases and sendmail -bi commands fail to be executed, and the message postalias: fatal: unsupported dictionary type: hash. Is the postfix-hash package installed? is displayed. |
| I4W02E | postfix | [22.03 LTS-RC2] [Arm/x86] The postmap / and postalias / commands fail to be executed, and the message fatal: unsupported dictionary type: hash. Is the postfix-hash package installed? is displayed. |
| I4SHKQ | procps-ng | [22.03] The top -b redirection causes the file type to change. |
| I4V6CB | python3 | A memory exception is detected when iotop is run in Python 3-3.9.9. |
| I4WVHK | python-anyjson | anyjson of branch 22.03 cannot be used. |
| I4VJR9 | python-bandit | [22.03-RC2] [Arm/x86] Dependency packages are missing during python3-bandit installation. |
| I4VK45 | python-blockdiag | [22.03-RC2] [Arm/x86] Dependency packages are missing during python3-blockdiag installation. |
| I4VKFL | python-dogpile.cache | [22.03-RC2] [Arm/x86] Dependency packages are missing during python3-dogpile-cache installation. |
| I4VKGW | python-eventlet | [22.03-RC2] [Arm/x86] Dependency packages are missing during python3-eventlet installation. |
| I4VKAC | python-gitdb | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install python-gitdb packages, the installation fails due to lack of dependency packages. |
| I4VK70 | python-GitPython | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install python-GitPython packages, the installation fails due to lack of dependency packages. |
| I4VKCW | python-graphviz | [22.03-RC2] [Arm/x86] Dependency packages are missing during python3-graphviz installation. |
| I4VKEM | python-mitmproxy | [22.03-RC2] [Arm/x86] Dependency packages are missing during python3-mitmproxy installation. |
| I4VJZ5 | python-pep517 | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install python-pep517 packages, the installation fails due to lack of dependency packages. |
| I4VYI1 | python-qt5 | [22.03-RC2] [Arm/x86] Failed to compile the python-qt5 source package locally. Unable to create the C++ Code is displayed. |
| I4VKC5 | python-sphinxcontrib-seqdiag | [22.03-RC2-Arm/x86] When the python-sphinxcontrib-seqdiag package is installed using source 2203 LTS_epol_round2, the installation fails due to lack of dependency packages. |
| I4VK2P | python-twine | [22.03-RC2-Arm/x86] When python-twine packages are installed using source 2203 LTS_epol_round2, the installation fails due to lack of dependency packages. |
| I4VVSZ | python-xmltodict | 22.03-lts python-xmltodict build failed. |
| I4WORY | python-xmltodict | [22.03-RC3] [Arm/x86] Failed to compile the python-xmltodict source package locally. The Memory is insufficient in two test cases. |
| I4VK5Y | python-xmod | [22.03-RC2-Arm/x86] When python-xmod packages are installed using source 2203 LTS_epol_round2, the installation fails due to lack of dependency packages. |
| I4U4OM | python-XStatic | [22.03-RC1-LTS-arm/x86] When python3-xstatic is installed using the 2203 LTS_epol_round1 source, Python stack error information is displayed. |
| I4VX2H | qpdf | [22.03-RC2] [Arm] The qpdf source package fails to be built locally. |
| I4UNTY | qt5-qttools | [22.03 LTS] [Arm/x86] An error is reported when the qdbus-qt5 --bus command is executed. |
| I4UODE | qt5-qttools | [22.03 LTS] [Arm/x86] Failed to run the lupdate-qt5 command (lupdate-qt5 @List -ts test.ts). |
| I4X9JZ | qt5-qttools | [22.03 LTS] [Arm/x86] Failed to run the lupdate-qt5 -silent command. |
| I4Y3YK | qt5-qttools | [22.03 LTS] [Arm/x86] The qt5-qttools command is successfully executed, but the command output cannot be searched using grep. |
| I4TZDB | rabbitmq-server | [22.03 LTS] [Arm/x86] rabbitmq-server cannot be started. |
| I4VWPE | raspberrypi-kernel | [22.03-RC2-Arm] After raspberrypi-kernel is successfully installed using source 2203 LTS_epol_round2 and uninstalled, the warning information is unclear. |
| I4WQ2R | redshift | [22.03-RC3-arm/x86] redshift-gtk.service does not exist after redshift is installed using the 2203RC3_epol source and uninstalled. |
| I4X2R4 | rootsh | [22.03 LTS-RC3] [Arm/x86] When Running the rootsh -? command, rootsh: Invalid Option -- '?' is displayed. |
| I4X5WR | rootsh | [22.03 LTS-RC3] [Arm/x86] When running the rootsh --login command, rootsh: unrecognized option '--login' is displayed. |
| I4SQCZ | rpcbind | After two IPv6 addresses in the same network segment are added to the NIC and the showmount -e command is executed for the two IP addresses, the GETADDR field does not display the latest IP address configuration. |
| I4VEEQ | rpcbind | [22.03] After the rpcbind service is enabled, if you kill the rpcbind main process and then run the rpcbind -h 127.0.0.1 command, core dump occurs. |
| I4SQ7X | rpm | rpmdb --initdb --root=[path] failure |
| I4XLFB | rpm | [openEuler 22.03LTS] Fail to generate IMA rpm digest list file when install the first rpm. |
| I4Y559 | rpm | The ima xattr of 0-parser_list-compact-libexec loss when updating digest-list-tools package. |
| I4SUXK | rpmrebuild | When the rpmrebuild --comment-missing=y --keep-perm -b -d /home/test filesystem-3.16-3.oe1.aarch6 command is executed to rebuild the filesystem package, the rebuild fails. |
| I4SJ4W | rsyslog | [openEuler-22.03-LTS-Next] The rsyslog remote encryption function is unavailable. The gnutls package needs to be added to the deliverable list or integrated into the main package. |
| I4RT5Z | rsyslog | The time zone is changed from A to B within a detection period, the rsyslog service is restarted, and then the time zone is changed back to A. the scheduled time zone detection script cannot detect the time zone change. As a result, the time recorded in the rsyslog log is different from the system time. |
| I4SHLY | rsyslog | Patches related to openEuler-print-main-queue-info-to-journal and openEuler-rsyslog.service are missing in the 22.03-lts-next branch. |
| I4V2GM | rsyslog | Logs received by the server contain garbled characters when remote gtls encrypted transmission is configured for rsyslog. |
| I4V8A8 | rsyslog | The rsyslog service cannot to be restarted frequently due to systemd restrictions. |
| I4XGJK | rsyslog | The name of the StartLimitBurst configuration item in the rsyslog.service file is incorrect and cannot be identified. |
| I4UJVU | ruby | [openEuler_22.03_LTS-round-1] An error is reported when a command in the ruby package is executed. |
| I4UJII | rubygem-xpath | [22.03-RC1] [x86/Arm] The rubygem-xpath source package fails to be built locally due to lack of compilation dependency. |
| I4UJC6 | rust-packaging | [22.03-RC1] [x86/Arm] The rust-packaging source package fails to be built locally due to lack of compilation dependency. |
| I4WYVP | samba | [22.03-LTS-RC3 Arm & x86] The smbcontrol all reload-config command displays ERROR: Could not determine network interfaces, you must use a interfaces config line. |
| I4UMHE | satyr | [22.03-RC1] [x86] The satyr source package fails to be compiled locally, and an error is reported in the check phase. |
| I4ZQ0G | sbd | [22.03-RC5-Arm/x86] After sbd-related packages are installed and uninstalled, sbd.service cannot be manually modified. |
| I4VETA | scl-utils | [22.03-RC2-arm/x86] When scl-utils-build packages are installed using source 2203 LTS_epol_round2, the installation fails due to lack of dependency packages. |
| I4U759 | secGear | When multiple enclaves of secGear print logs at the same time, logs are missing in the secgear.log file occasionally. |
| I4WCDC | secGear | The patch is not synchronized in the 22.03 branch. As a result, multiple enclaves print logs at the same time, and logs are missing in the secgear.log file occasionally. |
| I4SIGV | sed | [openEuler-22.03-LTS-Next] Execution fails when the length of the file referenced by the sed -f parameter exceeds 2 GB. |
| I4VE4O | sendmail | [22.03-RC2] [Arm/x86] Error message NOQUEUE: SYSERR(root): /etc/mail/sendmail.cf: line 164: readcf: map access: class hash not available is displayed when sendmail.service is started. |
| I4S8FB | sg3_utils | The rescan-scsi-bus.sh -r -a command unmounts the system drive. As a result, the system is abnormal. |
| I4TFW8 | shadow | [22.03-LTS] Upgrade of shadow causes other package installation alarms. |
| I4UQPN | sleuthkit | [fuzz] sleuthkit --sanitizer undefined runtime error |
| I4V3O4 | sleuthkit | [fuzz] sleuthkit --sanitizer address AddressSanitizer: heap-buffer-overflow |
| I4SO9A | smartmontools | The smartd service cannot be started by default. |
| I4UA3P | sos | [openEuler_22.03_LTS-round-1] An error is reported when a command in the sos package is executed. |
| I4ZMYY | spark | [22.03-RC5] [Arm/x86] Failed to install the spark package. |
| I4RRK9 | systemd | [20.03-sp3] DirectoryNotEmpty and ConditionDirectoryNotEmpty do not check whether an object is a directory. ConditionPathIsReadWrite does not check whether a path exists. |
| I4SZV4 | systemd | When the start, daemon-reload, and try-restart commands are executed on a service at the same time, jobs of the nop type remain. |
| I4UKQS | systemd | The default value of the rp_filter parameter is changed by systemd. |
| I4ULPX | systemd | [22.03-RC1] [x86/Arm] The systemd source package fails to be compiled locally, and an error is reported in the check phase. |
| I4RT33 | systemd | After set-property system.slice BlockIOWeight=value is run for cgroup, the value is not correctly written into /sys/fs/cgroup/blkio/system.slice/blkio.bfq.weight. |
| I4WUT4 | systemd | [22.03 LTS-RC3] [Arm/x86 ] Failed to reload systemd-udevd.service. |
| I4TFVY | texinfo | [22.03-LTS] the /usr/share/info/dir file is deleted during texinfo uninstallation, causing other 21 package uninstallation alarms. |
| I4WOP6 | texlive-split-w | [22.03-RC3] [Arm/x86] An error message is displayed when installing the texlive-t2 package. |
| I4WC2M | time-shutdown | [2203-LTS-Arm/x86] Prompt message on the taskbar is in English. |
| I4WC2S | time-shutdown | [2203-LTS-Arm/x86] The theme is always the dark theme. |
| I4UTKT | totem | [22.03 LTS-RC1] [Arm/x86] Failed to open totem. |
| I4VZD4 | tycho | [22.03-RC2] [Arm/x86] The tycho source package fails to be compiled locally. |
| I4U6FU | ukui-biometric-auth | [22.03-RC1-LTS-Arm/x86] After libpam-biometric or ukui-biometric-auth is installed using source 2203 LTS_epol_round1, the uninstallation fails. |
| I4VKHE | ukui-control-center | [2203-LTS-Arm/x86] The page is closed after the sound is enabled on the control panel. |
| I4VR99 | ukui-control-center | The version information displayed under Settings > Information > About is incorrect. |
| I4VZG5 | ukui-control-center | The control panel lacks the power management module. |
| I4WQJZ | ukui-control-center | [22.03-RC3-arm/x86] When the 2203RC3_epol source is used to install ukui-control-center, the alarm script fails to be executed and the exit code is 1. |
| I4WXYD | ukui-control-center | No device information is displayed in the audio settings of a non-root user on the control panel. |
| I4WZ27 | ukui-control-center | [2203-LTS-Arm/x86] The version number is empty in Control Panel > About. |
| I4VETG | ukui-desktop-environment | [22.03-RC2-arm/x86] When the ukui-desktop-environment packages are installed using source 2203 LTS_epol_round2, the installation fails due to lack of dependency packages. |
| I4WWJ6 | ukui-greeter | The login page is not fully translated. |
| I4VTCT | ukui-kwin | [2203-LTS-Arm/x86] ukui-kwin cannot be started. |
| I4UOHL | ukui-media | [22.03-LTS-Arm/x86] After the source 2203 LTS_everything_round1 is used to install ukui-media, seven lines of warning information is displayed. |
| I4V43P | ukui-panel | [2203-LTS-Arm/x86] The shortcut menu of ukui-panel is not translated. |
| I4W930 | ukui-screensaver | The lock screen is not correctly translated. |
| I4V1HE | ukui-system-monitor | [2203-LTS-Arm/x86] The interface is in English. |
| I4VSLP | ukui-system-monitor | [22.03-LTS-SP2-Arm/x86] Multiple lines of warning information is displayed when the source 2203 LTS_epol_round2 is used to install ukui-system-monitor. |
| I4RVIY | util-linux | The parameter passed to the --mount-proc command does not take effect. |
| I4SOVX | util-linux | column: segmentation fault on invalid unicode input passed to -s option |
| I4SOY9 | util-linux | logger: realloc buffer when header size changed |
| I4SUSY | util-linux | After the -f and -c parameters are used for cross-file system hard links, inodes of files in the same file system are inconsistent. |
| I4U72S | varnish | [22.03 LTS-RC1] [Arm/x86] Failed to reload the varnish.service. |
| I4VETK | vdsm | [22.03-RC2-Arm/x86] After the source 2203 LTS_epol_round2 is used to install the vdsm packages, the installation fails due to the lack of dependency packages. |
| I4ZPVQ | vdsm | [22.03-RC5-Arm/x86] The ksmtuned.service file does not exist after the vdsm packages are installed and uninstalled. |
| I4RTYH | vim | When the TAR package contains a file that contains the error field, garbled characters are displayed when you use VIM to open the tar package. |
| I4WCB7 | wireshark | [fuzz] wireshark--sanitizer memory MemorySanitizer: use-of-uninitialized-value |
| I4ULIA | xstream | [22.03-RC1] [x86/Arm] The xstream source package fails to be compiled locally due to lack of compilation dependency. |
| I4RSZ1 | yajl | Memory leakage occurs on the yajl_tree_parse interface. |
| I4WCHQ | yelp | [22.03 LTS-RC2] [AArch64] The help video in getting start with gnome of gnome-help cannot be played or closed. |
| I8I2PY | openeuler-os-build | [22.03 LTS] [loongarch64] The messages file does not exist in the /var/log directory. |
| I8I2QU | openeuler-os-build | [22.03 LTS] [loongarch64] Failed to install and start the PXE. |
| I8I2LI | openeuler-os-build | [22.03 LTS] [loongarch64] The xfs file system format is not supported. |
| I8I2RF | openeuler-os-build | [22.03 LTS] [loongarch64] Euler 2203Lts needs to support the kexec-tools software of the loongarch architecture. |
| I8HYX3 | kernel | [22.03 LTS] [loongarch64] [7A1000-3C5000L integrated GPU]During the system installation and startup, the welcome to GRUB message is displayed occasionally, and the system stops responding. |
| I8I2S4 | openeuler-os-build | [22.03 LTS] [loongarch64] "ERROR'python-nftables' failed" Is Displayed When the Firewalld Service Status Is Queried |
| I8I2T8 | openeuler-os-build | [22.03 LTS] [loongarch64] When the 7A1000-3C5000L Dual-Socket Server V2.0.04049-beta4 Firmware Version Is Used and the USB Flash Drive Is Selected for Boot, the Boot Device Cannot Be Accessed to Install the System |
| I8HYZ2 | kernel | [22.03 LTS] [loongarch64] In the 7A2000-3A5000 integrated display environment, the graphical installation interface cannot be displayed. |
| I8I2UR | openeuler-os-build | [22.03 LTS] [loongarch64] kvm: The ksmtuned command is missing. |
| I8HZ0L | kernel | [22.03 LTS] [loongarch64] GRUB does not support EFI framebuffer. |
| I8I2W5 | openeuler-os-build | [22.03 LTS] [loongarch64] LS2C5LC2_V2.1 Dual Mainboard - Lack of Architecture Support for Running fio |
| I8HZ67 | kernel | [22.03 LTS] [loongarch64] After the system is installed for the first time and the computer is restarted, the error message "failed to start Crash recovery kernel arming" is displayed on the character interface. |
| I8I2YH | openeuler-os-build | [22.03 LTS] [loongarch64] Failed to enable the cachefilesd service. |
| I8I30J | openeuler-os-build | [22.03 LTS] [loongarch64] In the 4-socket dual-bridge environment of the 3C5000-7A2000, the local hard disk cannot be identified in the installation destination. |
| I8I39W | openeuler-os-build | [22.03 LTS] [loongarch64] When the dnf repoclosure command is used to check the RPM package dependency of the ISO file in the 3C5000+7A2000 dual-socket system, the check fails. |
| I8HYZP | kernel | [22.03 LTS] [loongarch64] The LTP tool of the Euler community causes the kernel to crash during the test. |
| I8HYWI | kernel | [22.03 LTS] [loongarch64] The shmat02 test case fails during the LTP test. The failure cause is shmat() failed unexpectedly, expected: EACCES: EINVAL (22). |
| I8HYUV | kernel | [22.03 LTS] [loongarch64] The shmt09 test case fails during the LTP test. The failure cause is shmt09.c:154: Error: shmat Failed, shmid = 1, errno = 22. |
| I8HYTD | kernel | [22.03 LTS] [loongarch64] The shmat01 test case fails during the LTP test. The failure cause is shmat() failed: EINVAL (22). |
| I8HWOJ | qemu | [22.03 LTS] [loongarch64] KVM: When a VM is started using the backend hugepage memory, the physical machine reports an error and breaks down. |
| I8HZ3F | kernel | [22.03 LTS] [loongarch64] The 5.10 kernel version does not support kdump. |
| I8HW2K | qemu | [22.03 LTS] [loongarch64] QEMU does not support the -netdev user parameter. |
| I8HYEK | qemu | [22.03 LTS] [loongarch64] KVM: does not support memory hot swap. |
| I8HY9P | qemu | [22.03 LTS] [loongarch64] KVM: PCI device hot swap is not supported. |
| I8HXWE | qemu | [22.03 LTS] [loongarch64] kvm: CONFIG_DEBUG_FS is not enabled. |
| I8HYMG | kernel | [22.03 LTS] [loongarch64] The 3c5000ll-7a1000 trinity test program automatically stops. |
| I8I2XA | openeuler-os-build | [22.03 LTS] [loongarch64] Failed to enable the IPMI service. |
| I8I2V7 | openeuler-os-build | [22.03 LTS] [loongarch64] An error is reported when the SELinux status is changed from disabled to enforcing. |
| I8HXX8 | qemu | [22.03 LTS] [loongarch64] When a user creates a VM on the virtual system manager, selects the local installation media, and completes the configuration step by step, the GRUB installation page cannot be displayed. |
| I8HXG8 | qemu | [22.03 LTS] [loongarch64] After installing the VM software package virt-manager, you need to install the qemu-system-loongarch64 package separately. Otherwise, the qemu-system-loongarch64 package cannot be used. You are advised to add the dependency package to the spec file. |
| I8HY2C | oec-hardware | [22.03 LTS] [loongarch64] The crash spdk package is missing in the southbound compatibility test of 3c5000ll-7a1000. |
Bug Catching
