Long-Term Supported Versions

    Innovation Versions

      Resolved Issues

      For the complete issue list, see Issues.

      For the complete list kernel related commits, see Commits.

      For details about resolved issues, see Table 1.

      Table 1 Resolved issues

      IssueRepositoryDescriptionURL
      I7E0F3openEuler/kernel[openEuler-22.03-SP1]kernel cgroup leakhttps://gitee.com/openeuler/kernel/issues/I7E0F3
      I7GESAopenEuler/kernel[kernel-openEuler-22.03-LTS-SP1]Integrate the openEuler-22.03-LTS-SP1 kernel into the OS, enable the KASAN option, and perform the syzkaller fuzzy test on the kernel. BUG: KASAN: slab-out-of-boundshttps://gitee.com/openeuler/kernel/issues/I7GESA
      I7GRISopenEuler/kernel[openEuler-22.03-SP1]Abnormal Hard Interrupt Usage of Borridgehttps://gitee.com/openeuler/kernel/issues/I7GRIS
      I7H29YopenEuler/kernelInstall the latest patches of the Intel uncore module to solve the problem that warning information is displayed because the UPI discovery tables on the SPR CPU MCC are damaged.https://gitee.com/openeuler/kernel/issues/I7H29Y
      I7H2EMopenEuler/kernel[openEuler22.03-LTS-SP1]After the OS is installed on a VM and Prometheus is running, the VM breaks down.https://gitee.com/openeuler/kernel/issues/I7H2EM
      I7H2UHopenEuler/kernel[OLK-5.10] 3SNIC driver compilation failure using clanghttps://gitee.com/openeuler/kernel/issues/I7H2UH
      I7HBQDopenEuler/kernel[openEuler22.03-SP2][arm64]The long-term stability test fails.https://gitee.com/openeuler/kernel/issues/I7HBQD
      I7HBVWopenEuler/kernel[openEuler 22.03 SP2]The kdump is not generated.https://gitee.com/openeuler/kernel/issues/I7HBVW
      I7KN4VopenEuler/kernel[openEuler-22.03-SP1]After the VLAN interface of bond-alb is added to the bridge, packet loss occurs when the switch address is pinged.https://gitee.com/openeuler/kernel/issues/I7KN4V
      I7MRGSsrc-openEuler/gazelle[22.03 LTS SP2][mysql]When multiple NUMA nodes are configured for a single CPU and each NUMA node is configured with 2048 memory, the error message "RING: Cannot reserve memory" is displayed during TPC-C tests.https://gitee.com/openeuler/kernel/issues/I7MRGS
      I7NQ8ZopenEuler/kernel[openeuler-22.03-sp1]Error File not found: /root/rpmbuild/BUILDROOT/kernel-rt-5.10.0-136.34.0.rt62.64.aarch64/usr/lib64/libperf-jvmti.so Reported During Kernel-rt RPM Package Creationhttps://gitee.com/openeuler/kernel/issues/I7NQ8Z
      I7PMX6openEuler/kernel[openEuler 22.03 LTS SP1]No Error Message Is Displayed When the Number of File System Handles Reaches the Maximumhttps://gitee.com/openeuler/kernel/issues/I7PMX6
      I7PN0AopenEuler/kernel[openEuler 22.03 LTS SP2][MPAM]BUG: sleeping function called from invalid context Is Reported When the mpam Driver Is Initializedhttps://gitee.com/openeuler/kernel/issues/I7PN0A
      I7Q0ECopenEuler/kernel22.03 The kernel hns3/hclge bug of the LTS SP1 ARM server causes the server to frequently crash and restart.https://gitee.com/openeuler/kernel/issues/I7Q0EC
      I7RRY4openEuler/kernel[OpenEuler 22.03 LTS]When Openeuler functions as the NFS server, the performance deteriorates severely within 10 minutes during the pressure test on the client. (This problem does not recur in CentOS 7.6.)https://gitee.com/openeuler/kernel/issues/I7RRY4
      I7RWC7openEuler/kernel[OLK-5.10]The liburing test case causes the kernel to stop responding.https://gitee.com/openeuler/kernel/issues/I7RWC7
      I7S80Wsrc-openEuler/gazelle[22.03 LTS SP2][redis]When redis-benchmark is set to 5000 connections, the test is suspended.https://gitee.com/openeuler/kernel/issues/I7S80W
      I7T77PopenEuler/kernelA link error occurs when CONFIG_NET is disabled and CONFIG_EXT4_FS is enabled.https://gitee.com/openeuler/kernel/issues/I7T77P
      I7TLQTopenEuler/kernel[openeuler 22.03 LTS]Services running on the Openeuler VM are suspended in the kernel. Watchdog: BUG: soft lockuphttps://gitee.com/openeuler/kernel/issues/I7TLQT
      I7UNWFopenEuler/kernel[openEuler-22.03-SP1]The number of file handles increases abnormally and the system breaks down.https://gitee.com/openeuler/kernel/issues/I7UNWF
      I7YHTZopenEuler/kernel[openEuler 2203-SP1]Performance Deteriorates Due to Cache During Large File Readinghttps://gitee.com/openeuler/kernel/issues/I7YHTZ
      I83KR1openEuler/kernel[openEuler-22.03-SP1][x86]An error is reported when the LTP executes the cgroup test case.https://gitee.com/openeuler/kernel/issues/I83KR1
      I86CM2openEuler/kernel[openEuler-22.03-LTS]When the system is started, the kernel throws an exception and the system is suspended. (This problem occurs at a low probability.)https://gitee.com/openeuler/kernel/issues/I86CM2
      I87425src-openEuler/kernelOpenEuler22.03-LTS Occupies a Large Number of Swap Partitions When the Remaining Physical Memory Is Sufficient, Causing System Freezinghttps://gitee.com/openeuler/kernel/issues/I87425
      I8A0FLopenEuler/kernel[openEuler 22.03 SP2]During the IOZone test, 256 GB data is written to the local disk. After the node is restarted, the core log shows that the task is hung.https://gitee.com/openeuler/kernel/issues/I8A0FL
      I8ATZVsrc-openEuler/gazelle[22.03SP2][redis]When the redis-benchmark is used to test the performance of 10,000 concurrent requests, the performance deteriorates continuously.https://gitee.com/openeuler/kernel/issues/I8ATZV
      I8BCOHsrc-openEuler/gazelle[22.03SP2][redis]After redis-server is started, there is a high probability that TCP streams are interrupted and cannot be pinged during a long-term test.https://gitee.com/openeuler/kernel/issues/I8BCOH
      I8C9GKsrc-openEuler/gazelle[22.03SP2][redis]When 5000 concurrent requests are tested in redis-benchmark, call_alloc_fail occurs.https://gitee.com/openeuler/kernel/issues/I8C9GK
      I8EQXVsrc-openEuler/gazelle[22.03SP2][redis]When gazelle is used to start redis-server, the client is suspended after the SHUTDOWN command is executed. This problem does not occur in kernel mode.https://gitee.com/openeuler/kernel/issues/I8EQXV
      I8EXN6openEuler/kernelWhen the memory and swap usage of the Docker container reach the threshold, the disk I/O increases sharply.https://gitee.com/openeuler/kernel/issues/I8EXN6
      I8F24Isrc-openEuler/gpars[EulerMaker] gpars build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8F24I
      I8F24Jsrc-openEuler/groovy[EulerMaker] groovy build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8F24J
      I8F24Ksrc-openEuler/kernel[EulerMaker] kernel: kernel-rt, raspberrypi-kernel-rt, raspberrypi-kernel build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8F24K
      I8F24Nsrc-openEuler/mongo-java-driver[EulerMaker] mongo-java-driver build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8F24N
      I8F24Rsrc-openEuler/containers-common[EulerMaker] containers-common build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8F24R
      I8F24Vsrc-openEuler/sshj[EulerMaker] sshj build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8F24V
      I8F24Ysrc-openEuler/gradle[EulerMaker] gradle build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8F24Y
      I8F75Isrc-openEuler/ft_surfaceThe installation of mesa depends on ft_surface. As a result, the creation of baseiso, everything iso, edge_iso, and netinst_iso is blocked.https://gitee.com/openeuler/kernel/issues/I8F75I
      I8FY2Wsrc-openEuler/distributeddatamgr_datamgr_service[EulerMaker] distributeddatamgr_datamgr_service build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8FY2W
      I8FY2Xsrc-openEuler/distributeddatamgr_relational_store[EulerMaker] distributeddatamgr_relational_store build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8FY2X
      I8FY2Zsrc-openEuler/datovka[EulerMaker] datovka build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8FY2Z
      I8FY31src-openEuler/distributeddatamgr_data_object[EulerMaker] distributeddatamgr_data_object build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8FY31
      I8FY32src-openEuler/texworks[EulerMaker] texworks build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8FY32
      I8G5AYsrc-openEuler/A-Ops[EulerMaker] A-Ops build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8G5AY
      I8G5AZsrc-openEuler/libuvc[EulerMaker] libuvc build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8G5AZ
      I8G5B0src-openEuler/nlohmann_json[EulerMaker] nlohmann_json build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8G5B0
      I8G5BSsrc-openEuler/collectd[EulerMaker] collectd build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8G5BS
      I8GC8Rsrc-openEuler/ansible-2.9[EulerMaker] ansible-2.9 build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8GC8R
      I8GC8Ssrc-openEuler/python-libyang[EulerMaker] python-libyang build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8GC8S
      I8GCA8src-openEuler/ros_comm[EulerMaker] ros_comm build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8GCA8
      I8GCBHsrc-openEuler/opencv[EulerMaker] opencv build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8GCBH
      I8H3RFsrc-openEuler/nodelet_core[EulerMaker] nodelet_core build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8H3RF
      I8HR0PopenEuler/kernel[22.03-SP3-rc1]No kabi file is generated after the kernel source code package is installed.https://gitee.com/openeuler/kernel/issues/I8HR0P
      I8HS8LopenEuler/secDetectorsecDetectord can set the buffer size to a multiple of 2, not a power of 2.https://gitee.com/openeuler/kernel/issues/I8HS8L
      I8HSA5openEuler/secDetectorThe secDetector_program_action module cannot be repeatedly removed and inserted.https://gitee.com/openeuler/kernel/issues/I8HSA5
      I8HSGHopenEuler/secDetectorThe system breaks down after the probe .ko file is repeatedly inserted and removed.https://gitee.com/openeuler/kernel/issues/I8HSGH
      I8HYNLopenEuler/secDetectorWhen the file creation probe is enabled, the useradd process breaks down.https://gitee.com/openeuler/kernel/issues/I8HYNL
      I8HZXCsrc-openEuler/runcThe name of runc.spec is changed. As a result, the basic ISO creation is blocked.https://gitee.com/openeuler/kernel/issues/I8HZXC
      I8I431src-openEuler/gala-anteater[EulerMaker] gala-anteater build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8I431
      I8I432src-openEuler/gala-gopher[EulerMaker] gala-gopher build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8I432
      I8I495src-openEuler/openjdk-latest[22.03-SP3-alpha]The java-latest-openjdk package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8I495
      I8I4KHsrc-openEuler/openEuler-release[22.03-SP3-alpha]The openEuler-release package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8I4KH
      I8I4OAsrc-openEuler/mysql[22.03-SP3-alpha]The MySQL package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8I4OA
      I8I4RMsrc-openEuler/obs-bundled-gems[22.03-SP3-alpha]The obs-bundled-gems package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8I4RM
      I8I4T4src-openEuler/llvm-bolt[22.03-SP3-alpha]The llvm-bolt package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8I4T4
      I8I4UKsrc-openEuler/openjdk-17[22.03-SP3-alpha]The java-17-openjdk package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8I4UK
      I8I4W1src-openEuler/openjdk-11[22.03-SP3-alpha]The java-11-openjdk package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8I4W1
      I8I4XOsrc-openEuler/oec-hardware[22.03-SP3-alpha]The oec-hardware package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8I4XO
      I8I50Rsrc-openEuler/gala-spider[EulerMaker] gala-spider build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8I50R
      I8I549src-openEuler/hbase[22.03-SP3-alpha]The HBase package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8I549
      I8I5C3src-openEuler/sentencepiece[22.03-SP3-alpha]The sentencepiece package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8I5C3
      I8I5FNsrc-openEuler/OpenAMP[22.03-SP3-alpha]The openamp package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8I5FN
      I8I5HCsrc-openEuler/libmetal[22.03-SP3-alpha]The libmetal package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8I5HC
      I8ICAFopenEuler/secDetectorWhen the client receives events, a core dump occurs in secDetectord.https://gitee.com/openeuler/kernel/issues/I8ICAF
      I8ICAMopenEuler/secDetectorWhen a process exits, resources are not released if the process is not unsubed. As a result, secDetectord may reject services.https://gitee.com/openeuler/kernel/issues/I8ICAM
      I8ICASopenEuler/secDetectorWhen the number of links reaches the maximum, the newly registered topic of the sub interface does not return a null pointer.https://gitee.com/openeuler/kernel/issues/I8ICAS
      I8IFZLopenEuler/secDetectorunsub causes secDetectord to fail to kill and exit. Only kill -9https://gitee.com/openeuler/kernel/issues/I8IFZL
      I8IGJGsrc-openEuler/gazelle[22.03SP2]A core dump (stack_send) occurs when the client uses gazelle to send traffic for a long time.https://gitee.com/openeuler/kernel/issues/I8IGJG
      I8IGR8src-openEuler/gazelle[22.03SP2][Occasional]A core dump (poll_rpc_msg) occurs when the client uses gazelle to send traffic for a long time.https://gitee.com/openeuler/kernel/issues/I8IGR8
      I8ILSDsrc-openEuler/gazelle[22.03SP2]When the server uses gazelle and the MTU of the client NIC is changed, a core dump occurs on the server.https://gitee.com/openeuler/kernel/issues/I8ILSD
      I8INQGopenEuler/kernel[OLK-5.10]When the service openvswitch start command is used to start the OpenV Switch, the host is suspended.https://gitee.com/openeuler/kernel/issues/I8INQG
      I8IO9Qsrc-openEuler/kernelThe stratovirt_img file of the AArch64 architecture fails to be created in the openEuler-22.03-LTS-SP3 version.https://gitee.com/openeuler/kernel/issues/I8IO9Q
      I8ISXJsrc-openEuler/openEuler-release[openEuler-22.03-SP3-alpha]After the system is installed, the version branch is displayed as LTS-NEXT.https://gitee.com/openeuler/kernel/issues/I8ISXJ
      I8IXM2src-openEuler/aops-ceres[22.03-SP3-alpha]The aops-ceres package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8IXM2
      I8J084openEuler/sysmasterIn the VM scenario, the lvm-activate-openeuler.service service does not exist after the environment is started.https://gitee.com/openeuler/kernel/issues/I8J084
      I8J0UZsrc-openEuler/openvswitch[22.03-LTS-SP3][aarch64]The openvswitch service fails to be started. As a result, the host logs out.https://gitee.com/openeuler/kernel/issues/I8J0UZ
      I8J4F3openEuler/sysmasterudevd-kernel.socket Fails to Be Started in VM Scenarioshttps://gitee.com/openeuler/kernel/issues/I8J4F3
      I8J76Isrc-openEuler/gazelle[22.03SP2][Feature introduction]When the LStack is not started during the LRAN startup, an error message is displayed.https://gitee.com/openeuler/kernel/issues/I8J76I
      I8J8UAopenEuler/UniProtonWhen there are two signals to be processed, the program breaks down.https://gitee.com/openeuler/kernel/issues/I8J8UA
      I8J9V2openEuler/secDetectorThe secDetector has multiple code problems.https://gitee.com/openeuler/kernel/issues/I8J9V2
      I8JDNCsrc-openEuler/erlang-meck[22.03-LTS-SP3]erlang-meck downgraded in 22.03-LTS-SP3 compared to 22.03-LTS-SP2https://gitee.com/openeuler/kernel/issues/I8JDNC
      I8JDS1src-openEuler/criu[22.03-LTS-SP3]criu downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JDS1
      I8JDTZsrc-openEuler/rpmlint[22.03-LTS-SP3]The rpmlint is downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3.https://gitee.com/openeuler/kernel/issues/I8JDTZ
      I8JDUFsrc-openEuler/protobuf[22.03-LTS-SP3]The protobuf is degraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JDUF
      I8JDW9src-openEuler/iproute[22.03-LTS-SP3]iproute downgraded in 22.03-LTS-SP3 compared to 22.03-LTS-SP2https://gitee.com/openeuler/kernel/issues/I8JDW9
      I8JDX1src-openEuler/ntp[22.03-LTS-SP3]NTP downgrade in 22.03-LTS-SP3 compared with 22.03-LTS-SP2https://gitee.com/openeuler/kernel/issues/I8JDX1
      I8JDXYsrc-openEuler/initial-setup[22.03-LTS-SP3]initial-setup is downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3.https://gitee.com/openeuler/kernel/issues/I8JDXY
      I8JEMXsrc-openEuler/ctags[22.03-LTS-SP3]ctags downgraded in 22.03-LTS-SP3 compared to 22.03-LTS-SP2https://gitee.com/openeuler/kernel/issues/I8JEMX
      I8JEP5src-openEuler/qt5-qtbase[22.03-LTS-SP3]qt5-qtbase is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JEP5
      I8JEQZsrc-openEuler/storm[22.03-LTS-SP3]Storm is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JEQZ
      I8JER7src-openEuler/dbus[22.03-LTS-SP3]The dbus is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JER7
      I8JESVsrc-openEuler/erlang-rpm-macros[22.03-LTS-SP3]erlang-rpm-macros downgraded in 22.03-LTS-SP3 compared to 22.03-LTS-SP2https://gitee.com/openeuler/kernel/issues/I8JESV
      I8JEVLsrc-openEuler/pytorch[22.03-LTS-SP3]PyTorch is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JEVL
      I8JEYWsrc-openEuler/python-configshell[22.03-LTS-SP3]python-configshell downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JEYW
      I8JF19src-openEuler/python-imagesize[22.03-LTS-SP3]python-imagesize downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JF19
      I8JF3Fsrc-openEuler/busybox[22.03-LTS-SP3]The BusyBox is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JF3F
      I8JF46src-openEuler/libsrtp[22.03-LTS-SP3]The libsrtp is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JF46
      I8JF6Isrc-openEuler/redis6[22.03-LTS-SP3]Redis 6 is downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3.https://gitee.com/openeuler/kernel/issues/I8JF6I
      I8JF71src-openEuler/sysget[22.03-LTS-SP3]The sysget command is downgraded from 22.03-LTS-SP2 to 22.03-LTS-SP3.https://gitee.com/openeuler/kernel/issues/I8JF71
      I8JFADsrc-openEuler/redis5[22.03-LTS-SP3]Redis 5 is downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3.https://gitee.com/openeuler/kernel/issues/I8JFAD
      I8JFASsrc-openEuler/sqlite[22.03-LTS-SP3]sqlite downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JFAS
      I8JFCDsrc-openEuler/jsoncpp[22.03-LTS-SP3]jsoncpp downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JFCD
      I8JFDAopenEuler/secDetectorDuring the period from sub to read, if a large number of events are generated, secD core dump occurs during read.https://gitee.com/openeuler/kernel/issues/I8JFDA
      I8JFFMsrc-openEuler/python-bottle[22.03-LTS-SP3]python-bottle downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JFFM
      I8JFFRopenEuler/secDetectorWhen a probe is created using a file, the filename of the created probe is incorrect.https://gitee.com/openeuler/kernel/issues/I8JFFR
      I8JFG2openEuler/secDetectorIn the same process, if two readers are registered in serial mode or two readerfroms are opened for the same reader in parallel, a core dump occurs.https://gitee.com/openeuler/kernel/issues/I8JFG2
      I8JFGKsrc-openEuler/firefox[22.03-LTS-SP3]Firefox 22.03-LTS-SP3 is downgraded compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JFGK
      I8JFI7src-openEuler/ttmkfdir[22.03-LTS-SP3]ttmkfdir is degraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JFI7
      I8JFJ5src-openEuler/p7zip[22.03-LTS-SP3]p7zip is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JFJ5
      I8JFL7src-openEuler/sudo[22.03-LTS-SP3]sudo downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JFL7
      I8JFOJsrc-openEuler/containerd[22.03-LTS-SP3]containerd downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JFOJ
      I8JFZMsrc-openEuler/python-mako[22.03-LTS-SP3]python-mako downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JFZM
      I8JG17src-openEuler/python-psutil[22.03-LTS-SP3]python-psutil downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JG17
      I8JG24src-openEuler/openwebbeans[22.03-LTS-SP3]The openwebbeans is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JG24
      I8JG30src-openEuler/lwip[22.03-LTS-SP3]The lwip is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JG30
      I8JG3Zsrc-openEuler/enchant2[22.03-LTS-SP3]enchant2 is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JG3Z
      I8JG49src-openEuler/exempi[22.03-LTS-SP3]The exempi is degraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JG49
      I8JG4Tsrc-openEuler/libssh[22.03-LTS-SP3]libssh downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JG4T
      I8JG5Vsrc-openEuler/firewalld[22.03-LTS-SP3]The firewalld is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JG5V
      I8JG7Msrc-openEuler/libimagequant[22.03-LTS-SP3]libimagequant is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JG7M
      I8JG7Usrc-openEuler/xfsprogs[22.03-LTS-SP3]xfsprogs downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JG7U
      I8JG8Gsrc-openEuler/python-beaker[22.03-LTS-SP3]python-beaker downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JG8G
      I8JG8Qsrc-openEuler/python-wheel[22.03-LTS-SP3]python-wheel downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JG8Q
      I8JG9Vsrc-openEuler/golang[22.03-LTS-SP3]Golang is degraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JG9V
      I8JGATsrc-openEuler/numactl[22.03-LTS-SP3]numactl downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JGAT
      I8JGBMsrc-openEuler/python-sphinx-theme-alabaster[22.03-LTS-SP3]The python-sphinx-theme-alabaster is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JGBM
      I8JGD0src-openEuler/secGear[22.03-LTS-SP3]secGear Downgrade in 22.03-LTS-SP3 Compared to 22.03-LTS-SP2https://gitee.com/openeuler/kernel/issues/I8JGD0
      I8JGDMsrc-openEuler/osinfo-db[22.03-LTS-SP3]osinfo-db downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JGDM
      I8JGDOsrc-openEuler/dmraid[22.03-LTS-SP3]The dmraid is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JGDO
      I8JGEJsrc-openEuler/pyflakes[22.03-LTS-SP3]python-pyflakes downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JGEJ
      I8JGERsrc-openEuler/libbpf[22.03-LTS-SP3]The libbpf is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JGER
      I8JGFGsrc-openEuler/libnetfilter_conntrack[22.03-LTS-SP3]libnetfilter_conntrack downgraded in 22.03-LTS-SP3 compared to 22.03-LTS-SP2https://gitee.com/openeuler/kernel/issues/I8JGFG
      I8JGFMsrc-openEuler/security-tool[22.03-LTS-SP3]The security-tool is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JGFM
      I8JGG0src-openEuler/python-flask-restful[22.03-LTS-SP3]python-flask-restful downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JGG0
      I8JGHSsrc-openEuler/gdk-pixbuf2[22.03-LTS-SP3]gdk-pixbuf2 is degraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JGHS
      I8JGHZsrc-openEuler/python-pymongo[22.03-LTS-SP3]python-pymongo downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JGHZ
      I8JGJTsrc-openEuler/ghostscript[22.03-LTS-SP3]ghostscript downgrade in 22.03-LTS-SP3 compared to 22.03-LTS-SP2https://gitee.com/openeuler/kernel/issues/I8JGJT
      I8JMZIopenEuler/UniProtonWhen the program processes and returns signals in the case of floating-point calculation, the program breaks down.https://gitee.com/openeuler/kernel/issues/I8JMZI
      I8JNSHsrc-openEuler/gradle[22.03-LTS-SP3]The gradle is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JNSH
      I8JNX5src-openEuler/dotconf[22.03-LTS-SP3]dotconf downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JNX5
      I8JO5Bsrc-openEuler/gazelle[22.03-LTS-SP3]gazelle downgraded in 22.03-LTS-SP3 compared to 22.03-LTS-SP2https://gitee.com/openeuler/kernel/issues/I8JO5B
      I8JOCKsrc-openEuler/dde-network-core[EulerMaker] dde-network-core build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8JOCK
      I8JOCMsrc-openEuler/k3s[EulerMaker] k3s build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8JOCM
      I8JOCRsrc-openEuler/deepin-manual[EulerMaker] deepin-manual build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8JOCR
      I8JOERsrc-openEuler/aops-zeus[22.03-SP3-rc1]The aops-zeus package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JOER
      I8JOJCsrc-openEuler/migration-tools[EulerMaker] migration-tools build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8JOJC
      I8JOJEsrc-openEuler/ros2_base[EulerMaker] ros2_base build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8JOJE
      I8JOJFsrc-openEuler/rocksdb[EulerMaker] rocksdb build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8JOJF
      I8JOJGsrc-openEuler/dde-app-services[EulerMaker] dde-app-services build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8JOJG
      I8JOJHsrc-openEuler/ft_engine[EulerMaker] ft_engine build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8JOJH
      I8JOJTsrc-openEuler/python-netaddr[22.03-LTS-SP3]python-netaddr downgraded from 22.03-LTS-SP2 in 22.03-LTS-SP3https://gitee.com/openeuler/kernel/issues/I8JOJT
      I8JOMRsrc-openEuler/ebtables[22.03-LTS-SP3]The ebtables is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JOMR
      I8JOPMsrc-openEuler/gcc-7[EulerMaker] gcc-7 build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8JOPM
      I8JORCsrc-openEuler/kata_integration[22.03-LTS-SP3]kata-integration is degraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JORC
      I8JQHLsrc-openEuler/aops-vulcanus[22.03-SP3-rc1]The aops-vulcanus package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JQHL
      I8JQIZsrc-openEuler/cadvisor[22.03-SP3-rc1]The cadvisor package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JQIZ
      I8JQL6src-openEuler/dsoftbus[22.03-SP3-rc1]The dsoftbus package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JQL6
      I8JQRYsrc-openEuler/gcc-cross[22.03-SP3-rc1]The gcc-cross package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JQRY
      I8JQUEsrc-openEuler/oepkgs-repos[22.03-SP3-rc1]The oepkgs-release package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JQUE
      I8JQWWsrc-openEuler/python-django[22.03-SP3-rc1]The python-django package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JQWW
      I8JRGNsrc-openEuler/pyang[22.03-SP3-rc1]The python-pyang package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JRGN
      I8JRK0src-openEuler/redshift[22.03-SP3-rc1]The redshift package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JRK0
      I8JRLJsrc-openEuler/nestos-installer[22.03-SP3-rc1]The rust-nestos-installer package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JRLJ
      I8JRM9src-openEuler/shotwell[22.03-SP3-rc1]The shotwell package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JRM9
      I8JRNEsrc-openEuler/ukui-settings-daemon[22.03-SP3-rc1]The ukui-settings-daemon package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JRNE
      I8JRQ9src-openEuler/X-diagnosis[22.03-SP3-rc1]The xdiagnose package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8JRQ9
      I8JY1VopenEuler/sysmasterIn the VM scenario, a binary file is generated in the log file after the system is restarted.https://gitee.com/openeuler/kernel/issues/I8JY1V
      I8JY5Zsrc-openEuler/cockpit[22.03-LTS-SP3 rc1][arm/x86]An error is reported when cockpit.service is started.https://gitee.com/openeuler/kernel/issues/I8JY5Z
      I8JZOHsrc-openEuler/initial-setup[22.03-LTS-SP3 RC1][arm/x86 ]Failed to Start the initial-setup Servicehttps://gitee.com/openeuler/kernel/issues/I8JZOH
      I8K608src-openEuler/kae_driver[22.03-SP3-rc1]The kae_driver package is downgraded in 22.03-LTS-SP3 compared with 22.03-LTS-SP2.https://gitee.com/openeuler/kernel/issues/I8K608
      I8K6SMsrc-openEuler/booth[22.03-SP3-rc1]The 22.03-LTS-SP3 branch is not introduced to the booth package.https://gitee.com/openeuler/kernel/issues/I8K6SM
      I8KGZZsrc-openEuler/oemaker[22.03-SP3-rc1][x86]When the edge image is installed in UEFI mode, a message is displayed indicating that the grub2-efi-x64 package is missing.https://gitee.com/openeuler/kernel/issues/I8KGZZ
      I8KQBZopenEuler/kernel[OLK-5.10] The CPU range returned by the syscall __NR_sched_getaffinity is incorrect.https://gitee.com/openeuler/kernel/issues/I8KQBZ
      I8KRW5src-openEuler/sysmonitor[22.03-LTS-SP3 RC1][arm/x86 ]An error message is displayed when the sysmonitor.service service is started.https://gitee.com/openeuler/kernel/issues/I8KRW5
      I8KS6RopenEuler/dpu-utilitiesKill the udsproxyd process without unmounting it on the client.https://gitee.com/openeuler/kernel/issues/I8KS6R
      I8KS9AopenEuler/kernelAfter the SMMU is enabled, some CPU cores are full. As a result, services are blocked.https://gitee.com/openeuler/kernel/issues/I8KS9A
      I8KUFNopenEuler/sysmasterIn VM scenarios, if DefaultDependencies is not configured and the target file is missing, the service can be started successfully.https://gitee.com/openeuler/kernel/issues/I8KUFN
      I8KWNM[22.03-SP3-rc1]Delete the kata-micro-kernel package from the 22.03-lts-sp3 repo source. (Reason: The repository is closed.)https://gitee.com/openeuler/kernel/issues/I8KWNM
      I8KWYWsrc-openEuler/obs-server[22.03-LTS-SP3 rc1][arm/x86]An error message is displayed when obsapisetup is started.https://gitee.com/openeuler/kernel/issues/I8KWYW
      I8KYS6openEuler/dpu-utilitiesThe server and client specify the UID to create a user and modify the file owner information.https://gitee.com/openeuler/kernel/issues/I8KYS6
      I8L1HEopenEuler/dpu-utilitiesThe new alias command cannot be executed using rexec.https://gitee.com/openeuler/kernel/issues/I8L1HE
      I8L3RQsrc-openEuler/mandoc[22.03 LTS SP3 round1][arm\x86]An error message is displayed during the mandoc installation.https://gitee.com/openeuler/kernel/issues/I8L3RQ
      I8L4PFsrc-openEuler/SmartHBA-2100-8i-driver[22.03 LTS SP3 round1][arm\x86]An error message is displayed during smartpqi installation.https://gitee.com/openeuler/kernel/issues/I8L4PF
      I8L4ULsrc-openEuler/linux-sgx-driver[22.03 LTS SP3 round1][arm\x86]Exception Information Is Displayed During linux-sgx-driver Installationhttps://gitee.com/openeuler/kernel/issues/I8L4UL
      I8L7DRsrc-openEuler/pylint[22.03-lTS-SP3]An error is reported when the pylint command is executed.https://gitee.com/openeuler/kernel/issues/I8L7DR
      I8L90Zsrc-openEuler/dsoftbus[22.03 LTS SP3 round1][arm\x86]The dsoftbus installation conflicts with the hilog installation.https://gitee.com/openeuler/kernel/issues/I8L90Z
      I8L940src-openEuler/protobuf2[22.03 LTS SP3 round1][arm\x86]Installing protobuf2-compiler conflicts with protobuf-compilerhttps://gitee.com/openeuler/kernel/issues/I8L940
      I8L97Nsrc-openEuler/dsoftbus[22.03 LTS SP3 round1][arm\x86]The dsoftbus and distributed-utils conflict.https://gitee.com/openeuler/kernel/issues/I8L97N
      I8L9DBsrc-openEuler/hadoop[22.03 LTS SP3 round1][arm\x86]Installing Hadoop and Hadoop-3.1 Multiple Packages Conflicthttps://gitee.com/openeuler/kernel/issues/I8L9DB
      I8L9SKsrc-openEuler/redis5[22.03 LTS SP3 round1][arm\x86]Redis5, Redis, and Redis6 conflict.https://gitee.com/openeuler/kernel/issues/I8L9SK
      I8L9TNsrc-openEuler/redis6[22.03 LTS SP3 round1][arm\x86]Redis6, Redis, and Redis5 conflict.https://gitee.com/openeuler/kernel/issues/I8L9TN
      I8LGLOsrc-openEuler/obs-server[22.03 LTS SP3 round1][arm\x86]An error message is displayed during the OBS server installation.https://gitee.com/openeuler/kernel/issues/I8LGLO
      I8LH3RopenEuler/kernel[22.03-SP3-rc1][x86/arm]The local self-compilation of the kernel source code package fails because the libperf-jvmti.so file is missing.https://gitee.com/openeuler/kernel/issues/I8LH3R
      I8LHC5src-openEuler/kernel[22.03 LTS SP3 round1][arm\x86]Installing kernel-rt-tools conflicts with kernel-tools, and kernel-headers conflicts with kernel-rt-headers.https://gitee.com/openeuler/kernel/issues/I8LHC5
      I8LHU3src-openEuler/glibc[22.03-SP3-rc1][x86]Local self-compilation of the glibc source code package fails because the add-Wl-z-noseparate-code-for-so.patch file does not exist.https://gitee.com/openeuler/kernel/issues/I8LHU3
      I8LO3Csrc-openEuler/ft_engine[22.03 LTS SP3 round1][arm\x86]Installing ft_engine-devel conflicts with ft_utilshttps://gitee.com/openeuler/kernel/issues/I8LO3C
      I8LQC4src-openEuler/nototools[22.03-LTS-SP3]Some commands cannot be used.https://gitee.com/openeuler/kernel/issues/I8LQC4
      I8LRSFopenEuler/sysmasterIn the VM scenario, after SocketMode is configured, the permission is inconsistent with the configured value.https://gitee.com/openeuler/kernel/issues/I8LRSF
      I8LTCDsrc-openEuler/A-Ops[22.03-SP3-rc1][x86/arm]The local self-compilation of the A-Ops source code package fails because the compilation dependency python3-libyang is missing.https://gitee.com/openeuler/kernel/issues/I8LTCD
      I8LZWUsrc-openEuler/gcc[22.03_LTS_SP3_RC1][x86/arm]gcc-10.3.1-38.oe2203sp3 has insecure compilation option PIE.https://gitee.com/openeuler/kernel/issues/I8LZWU
      I8LZXMsrc-openEuler/boom-boot[22.03_LTS_SP3 round1][arm\x86]When a boom-related command is executed, a message is displayed, indicating that the command is unknown.https://gitee.com/openeuler/kernel/issues/I8LZXM
      I8M07Qsrc-openEuler/gvfs[22.03_LTS_SP3_RC1][x86/arm]gvfs-1.46.2-4.oe2203sp3 has insecure compilation option rpath.https://gitee.com/openeuler/kernel/issues/I8M07Q
      I8M95Isrc-openEuler/mutter[22.03_LTS_SP3_RC1][x86/arm]The insecure compilation option rpath exists in mutter-3.38.4-7.oe2203sp3.https://gitee.com/openeuler/kernel/issues/I8M95I
      I8MBGXopenEuler/dpu-utilitiesWhen the MKFIFO concurrently uses the host to read data from the client, the write operation is suspended.https://gitee.com/openeuler/kernel/issues/I8MBGX
      I8MBU2src-openEuler/SmartHBA-2100-8i-driver[22.03 LTS SP3 round1][arm\x86]An error message is displayed during smartpqi uninstallation.https://gitee.com/openeuler/kernel/issues/I8MBU2
      I8MCAFsrc-openEuler/sysmaster[22.03 LTS SP3 round1][arm\x86]An error message is displayed during devmaster uninstallation.https://gitee.com/openeuler/kernel/issues/I8MCAF
      I8MDA9openEuler/yocto-meta-openeuler[2203 sp3]The SDK file is missing during qemu-aarch64 construction.https://gitee.com/openeuler/kernel/issues/I8MDA9
      I8MDAOopenEuler/yocto-meta-openeuler[2203 sp3]Raspberry Pi RT (soft real-time) build lacks SDK files.https://gitee.com/openeuler/kernel/issues/I8MDAO
      I8MFM9openEuler/yocto-meta-openeuler[2203 sp3] The zImage file is not generated for qemu-aarch64-ros.https://gitee.com/openeuler/kernel/issues/I8MFM9
      I8MG11src-openEuler/kernel2203 SP3 dailybuild fails to make std-vmlinux in stratovirt_img of aarch64 architecturehttps://gitee.com/openeuler/kernel/issues/I8MG11
      I8MJFSopenEuler/dpu-utilitiesAfter the virsh console command is executed, other virsh commands are suspended.https://gitee.com/openeuler/kernel/issues/I8MJFS
      I8MK38src-openEuler/firefox[EulerMaker] firefox build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8MK38
      I8MK3Asrc-openEuler/mozjs78[EulerMaker] mozjs78 build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8MK3A
      I8MKA6src-openEuler/kernel[EulerMaker] kernel: kernel-rt, raspberrypi-kernel-rt, raspberrypi-kernel build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8MKA6
      I8MKCZsrc-openEuler/openjdk-1.8.0[EulerMaker] openjdk-1.8.0 build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8MKCZ
      I8MKD0src-openEuler/openjdk-11[EulerMaker] openjdk-11 build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8MKD0
      I8MKWAopenEuler/yocto-meta-openeuler[2203 sp3]Incorrect os-release information.https://gitee.com/openeuler/kernel/issues/I8MKWA
      I8MKZQopenEuler/yocto-meta-openeuler[2203 sp3]Login Without a Passwordhttps://gitee.com/openeuler/kernel/issues/I8MKZQ
      I8ML3Isrc-openEuler/ukui-control-center[22.03 LTS SP3 round1][arm\x86]An error message is displayed during the indirect uninstallation of ukui-control-center.https://gitee.com/openeuler/kernel/issues/I8ML3I
      I8MN2Usrc-openEuler/gazelle[22.03SP2][Log enhancement]When the client exits, only two FIN packets are sent, but Gazelle prints three FIN event logs.https://gitee.com/openeuler/kernel/issues/I8MN2U
      I8MNWWopenEuler/yocto-meta-openeuler[2203 sp3]An error is reported when the tar -cjf command is executed.https://gitee.com/openeuler/kernel/issues/I8MNWW
      I8MVTVsrc-openEuler/ovirt-provider-ovn[22.03-SP3-rc2]The 22.03-LTS-SP3 branch is not introduced in the ovirt-provider-ovn package.https://gitee.com/openeuler/kernel/issues/I8MVTV
      I8MVW7src-openEuler/libyang[22.03-SP3-rc2]The 22.03-LTS-SP3 branch is not introduced to the libyang package.https://gitee.com/openeuler/kernel/issues/I8MVW7
      I8MW3Esrc-openEuler/lustre[22.03-SP3-rc2]The 22.03-LTS-SP3 branch is not introduced to the lustre package.https://gitee.com/openeuler/kernel/issues/I8MW3E
      I8N02Isrc-openEuler/gazelle[22.03SP2][Log enhancement]After a single link receives out-of-order FIN packets, another link receives correct RST packets. Event -14 is expected to be printed, but actually event -14 is not printed.https://gitee.com/openeuler/kernel/issues/I8N02I
      I8N04Ysrc-openEuler/gazelle[22.03SP2][Log enhancement]After a single connection receives out-of-order FIN packets, the connection waits until the keeplive times out. As a result, a core dump occurs.https://gitee.com/openeuler/kernel/issues/I8N04Y
      I8N97Msrc-openEuler/dde-file-manager[22.03 LTS SP3 round2][x86]The dde-desktop fails to be installed, and a conflict message is displayed.https://gitee.com/openeuler/kernel/issues/I8N97M
      I8N9CSsrc-openEuler/dde-dock[22.03 LTS SP3 round2][x86]dde-dock-devel,dde-dock-onboard-plugin Fails to Be Installed and a Conflict Message Is Displayedhttps://gitee.com/openeuler/kernel/issues/I8N9CS
      I8NBMSsrc-openEuler/gazelle[22.03SP2]The server is not started. After the client is started with gazelle and Ctrl+C is pressed to exit, signal 11 is printed.https://gitee.com/openeuler/kernel/issues/I8NBMS
      I8NBOKsrc-openEuler/dde-file-manager[22.03 LTS SP3 round2][x86]dde-file-manager,dde-disk-mount-plugin,dde-file-manager-devel,libdde-file-manager Fails to Be Installed and a Conflict Message Is Displayedhttps://gitee.com/openeuler/kernel/issues/I8NBOK
      I8NH3WopenEuler/sysmasterIn the VM scenario, when the devmaster service is started and the devctl monitor command is executed to monitor events, the time is not printed.https://gitee.com/openeuler/kernel/issues/I8NH3W
      I8NHFFsrc-openEuler/gazelle[22.03SP2]gazelle uses multiple threads. Error read stat response msg failed Is Reported When gazellectl Is Used to Query Informationhttps://gitee.com/openeuler/kernel/issues/I8NHFF
      I8NIDNsrc-openEuler/gazelle[22.03SP2]When the NIC queue is 16 and the memory is set to 2048, core dump occurs when 17 gazelle threads are started.https://gitee.com/openeuler/kernel/issues/I8NIDN
      I8NLP5src-openEuler/ft_wl_fwk[22.03 LTS SP3 round2][arm\x86]ft-wl-fwk Fails to Be Installed and a Conflict Message Is Displayedhttps://gitee.com/openeuler/kernel/issues/I8NLP5
      I8NQVWsrc-openEuler/gcc[22.03 SP3 RC2][deja]The expected target field cannot be found in the generated process or target file.https://gitee.com/openeuler/kernel/issues/I8NQVW
      I8NQZYsrc-openEuler/tzdataThe patch corresponding to tzdata is not synchronized.https://gitee.com/openeuler/kernel/issues/I8NQZY
      I8NR6YopenEuler/sysmasterIn the VM scenario, after OPTIONS+="static_node= is configured to modify the device node permission and the devmaster service is restarted, the permission cannot be modified.https://gitee.com/openeuler/kernel/issues/I8NR6Y
      I8NRICsrc-openEuler/protobuf2[22.03 LTS SP3 round2][x86]Installing protobuf2-compiler and arkui-linux at the Same Time Fails and a Conflict Message Is Displayedhttps://gitee.com/openeuler/kernel/issues/I8NRIC
      I8NRRLopenEuler/sysmasterIn the VM scenario, after devmaster is installed, the devctl-trigger service is configured in the multi-user directory, but the generated soft link is in sysinit.https://gitee.com/openeuler/kernel/issues/I8NRRL
      I8NRXEsrc-openEuler/bashecho {0..1000000}{0..1000000} will coredumphttps://gitee.com/openeuler/kernel/issues/I8NRXE
      I8NS7Esrc-openEuler/gcc[22.03 SP3 RC2][codedb]The -O3 -march=armv8.1-a -floop-crc option causes netcdf-c to compile Segmentation fault:during GIMPLE pass: loop_crc.https://gitee.com/openeuler/kernel/issues/I8NS7E
      I8NS8Tsrc-openEuler/mysql[EulerMaker] mysql build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8NS8T
      I8NS8Usrc-openEuler/efl[EulerMaker] efl build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8NS8U
      I8NSL2src-openEuler/kunpengsecl[EulerMaker] kunpengsecl build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8NSL2
      I8NSL3src-openEuler/uadk_engine[EulerMaker] uadk_engine build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8NSL3
      I8NSL6src-openEuler/libkae[EulerMaker] libkae build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8NSL6
      I8NSY6openEuler/yocto-meta-openeuler[2203 sp3]The Dhrystone 2 using register variables items in the performance test deteriorate significantly.https://gitee.com/openeuler/kernel/issues/I8NSY6
      I8NT4Fsrc-openEuler/gcc[22.03 SP3 RC2][codedb]The -O3 -march=armv8.1-a -floop-crc option causes gmp to compile ICE:at tree.h:4523: during GIMPLE pass: loop_crc.https://gitee.com/openeuler/kernel/issues/I8NT4F
      I8NTWNsrc-openEuler/ft_utils[22.03-SP3-rc2][x86/arm]The local self-compilation of the ft_utils source code package fails because the compilation dependency git is missing.https://gitee.com/openeuler/kernel/issues/I8NTWN
      I8NTXSsrc-openEuler/ft_wl_fwk[22.03-SP3-rc2][x86/arm]The local self-compilation of the ft_wl_fwk source code package fails because the compilation dependency git is missing.https://gitee.com/openeuler/kernel/issues/I8NTXS
      I8NTZAsrc-openEuler/gcc-7[EulerMaker] gcc-7 build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8NTZA
      I8NTZBsrc-openEuler/ncbi-blast[EulerMaker] ncbi-blast build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8NTZB
      I8NTZCsrc-openEuler/opencv[EulerMaker] opencv build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8NTZC
      I8NU67src-openEuler/i40e[22.03 LTS SP3 round2][arm\x86]An Error Message Is Displayed During i40e Installationhttps://gitee.com/openeuler/kernel/issues/I8NU67
      I8NU97src-openEuler/e2fsprogsAfter the ext4 log file is full, an infinite loop occurs in the output of the debugfs -R "logdump -aOS" command.https://gitee.com/openeuler/kernel/issues/I8NU97
      I8NW4Zsrc-openEuler/iproutetc qdisc NIC (not connected) soft lockup is generated during the delay test.https://gitee.com/openeuler/kernel/issues/I8NW4Z
      I8NZ4Osrc-openEuler/raspberrypi-userland[22.03 LTS SP3 round2][arm\x86]libraspberrypi0 libraspberrypi-bin libraspberrypi-devel libraspberrypi-help Installation Failurehttps://gitee.com/openeuler/kernel/issues/I8NZ4O
      I8NZ9Nsrc-openEuler/corosync-qdevice[22.03-LTS-SP3 RC2][arm/x86]Quorum Device Configuration Fails Because corosync-qdevice.service Is Missinghttps://gitee.com/openeuler/kernel/issues/I8NZ9N
      I8O2D2src-openEuler/umdk[22.03-LTS-SP3 RC2][arm]Failure to Start uvsd.servicehttps://gitee.com/openeuler/kernel/issues/I8O2D2
      I8O2H7src-openEuler/gcc[22.03 SP3 RC2][Angha]-O3 option assembly failed: Error: invalid shift amount at operand 3https://gitee.com/openeuler/kernel/issues/I8O2H7
      I8O31Hsrc-openEuler/ub-dhcp[22.03-LTS-SP3 RC2][arm/x86]ub-dhcp-related services fail to be started.https://gitee.com/openeuler/kernel/issues/I8O31H
      I8O3I7src-openEuler/bpftoolfile /etc/bash_completion.d/bpftool command changeshttps://gitee.com/openeuler/kernel/issues/I8O3I7
      I8O40Esrc-openEuler/aops-apollo[22.03-LTS-SP3-RC3][arm/x86][Aops]Error 500 Is Reported When the Vulnerability Management Page Is Accessed, and the Log Displays a Package Import Errorhttps://gitee.com/openeuler/kernel/issues/I8O40E
      I8O451src-openEuler/systemd[22.03-LTS-SP3 RC2][arm/x86]console-getty.service Fails to Be Started Occasionallyhttps://gitee.com/openeuler/kernel/issues/I8O451
      I8O466src-openEuler/e2fsprogs[22.03 LTS SP3 round3][arm\x86]Failed to uninstall libcom_err.https://gitee.com/openeuler/kernel/issues/I8O466
      I8O4ONsrc-openEuler/cloud-initThe cfg file is configured for the user, and a new directory is generated. The owner and owner group of the directory are root.https://gitee.com/openeuler/kernel/issues/I8O4ON
      I8O6B7src-openEuler/aops-zeus[22.03-LTS-SP3-RC3][arm/x86][Aops]The result returned by the /manage/host/info/query interface is incorrect.https://gitee.com/openeuler/kernel/issues/I8O6B7
      I8O94Gsrc-openEuler/raspberrypi-firmware[22.03 LTS SP3 round2][arm]raspberrypi-eeprom raspberrypi-firmware raspberrypi-userland Installation Failurehttps://gitee.com/openeuler/kernel/issues/I8O94G
      I8O9PZsrc-openEuler/gcc[22.03 SP3 RC2][codedb]Segmentation fault occurs on SU2 due to the -O3 -flto -flto-partition=one -fipa-struct-reorg=3 option.https://gitee.com/openeuler/kernel/issues/I8O9PZ
      I8OB1YopenEuler/kernelThe watchdog of the 2288H V5 +22.03 LTS SP3 system does not trigger restart.https://gitee.com/openeuler/kernel/issues/I8OB1Y
      I8ODG5openEuler/yocto-meta-openeuler[2203 sp3]The qemu-arm SDK is successfully installed, but the source fails.https://gitee.com/openeuler/kernel/issues/I8ODG5
      I8OFHDsrc-openEuler/dsoftbus[22.03-SP3-rc3]The dsoftbus package is deleted from rc3.https://gitee.com/openeuler/kernel/issues/I8OFHD
      I8OG87src-openEuler/filemanagement_dfs_service[22.03-SP3-rc3]The dfs_service package is deleted from rc3.https://gitee.com/openeuler/kernel/issues/I8OG87
      I8OH5Xsrc-openEuler/dde[openEuler-22.03-LTS-SP3 rc3]After the DDE restores the source directory of a deleted file from the recycle bin to a read-only directory, the deleted file can still be restored.https://gitee.com/openeuler/kernel/issues/I8OH5X
      I8OH6Dsrc-openEuler/distributeddatamgr_relational_store[EulerMaker] distributeddatamgr_relational_store build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8OH6D
      I8OH6Fsrc-openEuler/distributeddatamgr_data_object[EulerMaker] distributeddatamgr_data_object build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8OH6F
      I8OH6Hsrc-openEuler/distributeddatamgr_datamgr_service[EulerMaker] distributeddatamgr_datamgr_service build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8OH6H
      I8OH6Isrc-openEuler/gcc-12[EulerMaker] gcc-12 build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8OH6I
      I8OH8Asrc-openEuler/dde[openEuler-22.03-LTS-SP3 rc3]The DDE initiator does not respond when a user clicks the input method application.https://gitee.com/openeuler/kernel/issues/I8OH8A
      I8OHD0src-openEuler/dde[openEuler-22.03-LTS-SP3 rc3]No Icon Is Displayed on the Taskbar After All Applications of the DDE ARM Are Openedhttps://gitee.com/openeuler/kernel/issues/I8OHD0
      I8OHK1src-openEuler/gmpIn the ARM environment, the execution of the certtool command for generating a private key is suspended at the gmp invoking.https://gitee.com/openeuler/kernel/issues/I8OHK1
      I8OHV5src-openEuler/cri-o[EulerMaker] cri-o install problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8OHV5
      I8OHV6src-openEuler/deepin-screensaver[EulerMaker] deepin-screensaver install problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8OHV6
      I8OHV7src-openEuler/xscreensaver[EulerMaker] xscreensaver install problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8OHV7
      I8OLNNsrc-openEuler/aops-apollo[22.03-LTS-SP3-RC3][arm/x86][Aops]The hot patch repair task is always being executed, and the log shows that the SQL statement is incorrect.https://gitee.com/openeuler/kernel/issues/I8OLNN
      I8OLV5src-openEuler/aops-ceres[22.03-LTS-SP3-RC3][arm/x86][Aops] The hot patch repair result is not called back.https://gitee.com/openeuler/kernel/issues/I8OLV5
      I8OMJCopenEuler/sysmasterIn VM scenarios, after devmaster is upgraded, udev.service and udev-trigger.service are set to automatically start upon system startup.https://gitee.com/openeuler/kernel/issues/I8OMJC
      I8OMVDsrc-openEuler/afterburn[22.03 LTS SP3 round3][arm\x86]An error message is displayed during the afterburn uninstallation.https://gitee.com/openeuler/kernel/issues/I8OMVD
      I8ONE5src-openEuler/aops-hermes[22.03-LTS-SP3-RC3][arm/x86][Aops]In the task details, the RPM package information is not displayed when the task is refreshed.https://gitee.com/openeuler/kernel/issues/I8ONE5
      I8ONP2src-openEuler/aops-hermes[22.03-LTS-SP3-RC3][arm/x86][Aops]Some column names on the CVE repair task details page are optimized.https://gitee.com/openeuler/kernel/issues/I8ONP2
      I8OPF3src-openEuler/aops-hermes[22.03-LTS-SP3-RC3][arm/x86][Aops]The search function is unavailable on the task details page.https://gitee.com/openeuler/kernel/issues/I8OPF3
      I8OQ03src-openEuler/gala-ragdoll[22.03-SP3-rc3][arm]The gala-ragdoll source code package does not compile the binary package of the ARM architecture.https://gitee.com/openeuler/kernel/issues/I8OQ03
      I8ORA8src-openEuler/python-libyang[22.03-SP3-rc3][arm]The python3-libyang binary package of the ARM architecture is not compiled from the python-libyang source code package.https://gitee.com/openeuler/kernel/issues/I8ORA8
      I8ORFEsrc-openEuler/aops-zeus[22.03-LTS-SP3-RC3][arm/x86][Aops]Vulnerability Scan Keeps Running Because aops-ceres Is Not Installed on the Hosthttps://gitee.com/openeuler/kernel/issues/I8ORFE
      I8ORNJsrc-openEuler/aops-hermes[22.03-LTS-SP3-RC3][arm/x86][Aops]The title of the Set REPO page is optimized.https://gitee.com/openeuler/kernel/issues/I8ORNJ
      I8OSI0src-openEuler/cockpit[22.03-LTS-SP3 rc3][arm]Failure to Start cockpit.servicehttps://gitee.com/openeuler/kernel/issues/I8OSI0
      I8OSSYsrc-openEuler/sssdThe compilation of the SSSD is suspended after the openEuler-22.03-LTS-SP3 branch is transferred from rc2 to test.https://gitee.com/openeuler/kernel/issues/I8OSSY
      I8OSVUsrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]After powerapi-devel is installed, the error message "md5sum: /etc/sysconfig/pwrapis/pwrapis_config.ini: No such file or directory" is displayed in the pwrapis.service log.https://gitee.com/openeuler/kernel/issues/I8OSVU
      I8OSWGsrc-openEuler/sambaSamba compilation is suspended after the openEuler-22.03-LTS-SP3 branch is transferred from rc2 to test.https://gitee.com/openeuler/kernel/issues/I8OSWG
      I8OT19src-openEuler/libomp[22.03-SP3-rc3]src-openeuler has two repositories: openmp and libomp. The software packages come from the same source and provide the same capabilities. You are advised to delete one of them.https://gitee.com/openeuler/kernel/issues/I8OT19
      I8OTMMsrc-openEuler/dde[openEuler-22.03-LTS-SP3 rc3]The DDE input method cannot be switched, and two applications depend on each other.https://gitee.com/openeuler/kernel/issues/I8OTMM
      I8OWLBsrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]When the powerapi-devel startup service is installed, an error is reported when the PWR_CPU_GetFreqAbility interface is invoked.https://gitee.com/openeuler/kernel/issues/I8OWLB
      I8OWS7src-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]After powerapi-devel is installed and uninstalled, the service status is still active.https://gitee.com/openeuler/kernel/issues/I8OWS7
      I8OWTZsrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]After powerapi-devel is installed and demo_main is executed, the console displays a success message and the log contains ERROR.https://gitee.com/openeuler/kernel/issues/I8OWTZ
      I8OX5Fsrc-openEuler/aops-apollo[22.03-LTS-SP3-RC3][arm/x86][Aops]On the CVE details page, the same CVE appears repeatedly on different pages.https://gitee.com/openeuler/kernel/issues/I8OX5F
      I8OXZAsrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]After the powerapi-devel is installed, the service is started. After the PWR_Register interface is repeatedly invoked, other functions fail to be invoked.https://gitee.com/openeuler/kernel/issues/I8OXZA
      I8OXZIsrc-openEuler/aops-hermes[22.03-LTS-SP3-RC3][arm/x86][Aops]On the CVE details page, a cold patch repair task is triggered. However, the frontend only triggers the task but does not execute it.https://gitee.com/openeuler/kernel/issues/I8OXZI
      I8OYLFsrc-openEuler/dde[openEuler-22.03-LTS-SP3 rc3]Restoration Fails After DDE ubackup Data Is Backed Uphttps://gitee.com/openeuler/kernel/issues/I8OYLF
      I8OYPYsrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]The parameter verification of the PWR_CPU_DmaSetLatency interface is incorrect.https://gitee.com/openeuler/kernel/issues/I8OYPY
      I8OYS0src-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][Usability][arm/x86]No error message is displayed when the interface fails to be executed. No message is displayed when the parameter type is abnormal.https://gitee.com/openeuler/kernel/issues/I8OYS0
      I8OYW2src-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][Documentation][arm/x86]The document content is inconsistent with the actual situation.https://gitee.com/openeuler/kernel/issues/I8OYW2
      I8OZ4Hsrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]The value range of the second parameter of the PWR_CPU_GetIdleGovernor interface is unclear.https://gitee.com/openeuler/kernel/issues/I8OZ4H
      I8P4Y1src-openEuler/aops-hermes[22.03-LTS-SP3-RC3][arm/x86][Aops]In the task list, the task type filter criterion does not contain hotpacth remove.https://gitee.com/openeuler/kernel/issues/I8P4Y1
      I8P544src-openEuler/aops-hermes[22.03-LTS-SP3-RC3][arm/x86][Aops]The execution report of the hot patch removal task is incorrect.https://gitee.com/openeuler/kernel/issues/I8P544
      I8P5K9src-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]When the PWR_CPU_SetFreqRange interface is used to set the minimum value to 0, maximum value to xx, maximum value to 0, and minimum value to xx, an error is reported.https://gitee.com/openeuler/kernel/issues/I8P5K9
      I8P5SYsrc-openEuler/aops-hermes[22.03-LTS-SP3-RC3][arm/x86][Aops]Failed to filter the CVE removal result in the hot patch removal task details.https://gitee.com/openeuler/kernel/issues/I8P5SY
      I8P658src-openEuler/aops-apollo[22.03-LTS-SP3-RC3][arm/x86][Aops]Failed to generate the repair task because the CVE corresponds to multiple hosts.https://gitee.com/openeuler/kernel/issues/I8P658
      I8P76Ksrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]When the PWR_CPU_GetIdleInfo interface is invoked, the error message "Unable to open direct: /sys/devices/system/cpu/cpu0/cpuidle" is displayed in the server log.https://gitee.com/openeuler/kernel/issues/I8P76K
      I8P8M2src-openEuler/aops-hermes[22.03-LTS-SP3-RC3][arm/x86][Aops]On the task details page, the input parameter for filtering Repair Status is incorrect.https://gitee.com/openeuler/kernel/issues/I8P8M2
      I8PAJ2src-openEuler/apache-poi[EulerMaker] apache-poi build problem in openEuler-22.03-LTS-SP3:everythinghttps://gitee.com/openeuler/kernel/issues/I8PAJ2
      I8PANYsrc-openEuler/gcc[22.03 SP3 RC3][deja]An error is reported when the -static-libasan option is compiled in the x86 architecture.https://gitee.com/openeuler/kernel/issues/I8PANY
      I8PBKTsrc-openEuler/gcc[22.03 SP3 RC3][deja]The expected target field cannot be found in the process or target file generated on the x86 architecture.https://gitee.com/openeuler/kernel/issues/I8PBKT
      I8PBSHsrc-openEuler/aops-apollo[22.03-LTS-SP3-RC3][arm/x86][Aops] Suggested Optimization Repair Task Namehttps://gitee.com/openeuler/kernel/issues/I8PBSH
      I8PC69src-openEuler/aops-apollo[22.03-LTS-SP3-RC3][arm/x86][Aops]In the case of multiple users, the host associated with the CVE is incorrect.https://gitee.com/openeuler/kernel/issues/I8PC69
      I8PE63src-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][x86]When PWR_CPU_GetFreqGovernor is called after PWR_CPU_GetIdleInfo, the governor value is abnormal (garble characters are displayed).https://gitee.com/openeuler/kernel/issues/I8PE63
      I8PF5Osrc-openEuler/aops-ceres[22.03-LTS-SP3-RC3][arm/x86][Aops]During the versioning cold patch repair task, the kabi check fails. The boot kernel uses the first one by default.https://gitee.com/openeuler/kernel/issues/I8PF5O
      I8PFBSsrc-openEuler/aops-hermes[22.03-LTS-SP3-RC3][arm/x86][Aops]The search criteria are not restricted on the hot patch removal details page.https://gitee.com/openeuler/kernel/issues/I8PFBS
      I8PFVHsrc-openEuler/gcc[22.03 SP3 RC3][codedb]Greenplum Compilation Is Suspended Due to the -O3 -fllc-allocate --param=filter-kernels=1 --param=branch-prob-threshold=50 Optionhttps://gitee.com/openeuler/kernel/issues/I8PFVH
      I8PGM7openEuler/yocto-meta-openeuler[2203 sp3]The kernel compilation time displayed by running the uname -a command is incorrect.https://gitee.com/openeuler/kernel/issues/I8PGM7
      I8PHU7src-openEuler/aops-zeus[22.03-LTS-SP3-RC3][arm/x86][Aops]During host registration, the length of the ssh_user field is not limited.https://gitee.com/openeuler/kernel/issues/I8PHU7
      I8PIIVsrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]The sock_file path configured on the server does not exist. As a result, the service fails to be restarted, and the failure cause is not provided in the log.https://gitee.com/openeuler/kernel/issues/I8PIIV
      I8PJ7TopenEuler/kernelIf the value of mlock is a negative number –65535, 0 is returned, which does not meet the expectation.https://gitee.com/openeuler/kernel/issues/I8PJ7T
      I8PL05src-openEuler/dde[openEuler-22.03-LTS-SP3 rc3]utsudoedit usage problemhttps://gitee.com/openeuler/kernel/issues/I8PL05
      I8PLUAopenEuler/yocto-meta-openeuler[2203 sp3]The image contains redundant files and certificates.https://gitee.com/openeuler/kernel/issues/I8PLUA
      I8PNH0openEuler/yocto-meta-openeuler[2203 sp3]Compiler security options are not enabled for some projects.https://gitee.com/openeuler/kernel/issues/I8PNH0
      I8PNQGsrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][x86]Use the PWR_CPU_SetFreqRange interface to set the maximum and minimum values of the CPU working frequency range, and then query the maximum and minimum values. It is found that the maximum and minimum values are the same.https://gitee.com/openeuler/kernel/issues/I8PNQG
      I8POUAopenEuler/dsoftbus_standardCVE-2023-43615https://gitee.com/openeuler/kernel/issues/I8POUA
      I8PRPSopenEuler/secDetectorIt is suspected that memory leakage occurs in secDetector.https://gitee.com/openeuler/kernel/issues/I8PRPS
      I8PSIKopenEuler/yocto-meta-openeuler[2203 sp3]The compilation command is incorrect in section "Accessing the oebuild Working Directory and Creating the Corresponding Compilation Configuration File."https://gitee.com/openeuler/kernel/issues/I8PSIK
      I8PT20openEuler/yocto-meta-openeuler[2203 sp3]Failed to build MCS-related components.https://gitee.com/openeuler/kernel/issues/I8PT20
      I8PUDTsrc-openEuler/gcc[22.03 SP3 RC4][deja]The expected target field cannot be found in the generated process or target file.https://gitee.com/openeuler/kernel/issues/I8PUDT
      I8PUNTsrc-openEuler/aops-zeus[22.03-LTS-SP3-RC4][arm/x86][Aops]Failed to register a host.https://gitee.com/openeuler/kernel/issues/I8PUNT
      I8PV93src-openEuler/openjdk-1.8.0[22.03-SP3-rc3/rc4]The latest version of the java-1.8.0-openjdk package cannot be built in the ARM architecture. As a result, the ARM version is inconsistent with the x86 version.https://gitee.com/openeuler/kernel/issues/I8PV93
      I8PVWAsrc-openEuler/aops-apollo[22.03-LTS-SP3-RC4][arm/x86][Aops]Failed to Roll Back the CVE After the Hot Patch Is Installed but Not Appliedhttps://gitee.com/openeuler/kernel/issues/I8PVWA
      I8PYBFsrc-openEuler/gcc[22.03 SP3 RC4][llvm]ICE:during IPA pass: icp Is Reported During -O3 -fwhole-program -fipa-ic Option Compilationhttps://gitee.com/openeuler/kernel/issues/I8PYBF
      I8PYLLsrc-openEuler/gcc[22.03 SP3 RC4][llvm]ICE:during IPA pass: icp Is Reported During -O3 -fwhole-program -ficp Option Compilationhttps://gitee.com/openeuler/kernel/issues/I8PYLL
      I8PYZZsrc-openEuler/ft_utils[22.03 LTS SP3 round4][arm\x86]An error message is displayed during the ft_utils installation.https://gitee.com/openeuler/kernel/issues/I8PYZZ
      I8PZJDsrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][Documentation][arm/x86]Sections 4.3.6, 4.3.7, and 4.3.11 in the openEuler PowerAPI Interface Reference do not provide usage examples.https://gitee.com/openeuler/kernel/issues/I8PZJD
      I8PZPQsrc-openEuler/aops-hermes[22.03-LTS-SP3-RC4][arm/x86][Aops] On the CVE details page, when Repo is set to Not set, the filtering fails.https://gitee.com/openeuler/kernel/issues/I8PZPQ
      I8PZZUsrc-openEuler/aops-hermes[22.03-LTS-SP3-RC4][arm/x86][Aops]During single-node system inspection, the PU does not check whether the host is restarted.https://gitee.com/openeuler/kernel/issues/I8PZZU
      I8Q12Ksrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]When PWR_CPU_SetFreq is called and gov is set to ondemand, the current frequency is not within the range. When the binary demo is executed, the error code 10 is returned (the frequency is not within the range).https://gitee.com/openeuler/kernel/issues/I8Q12K
      I8Q142src-openEuler/aops-zeus[22.03-LTS-SP3-RC4][arm/x86][Aops]Failed to Update the Remote Login Key on the Host Management Editing Pagehttps://gitee.com/openeuler/kernel/issues/I8Q142
      I8Q22TopenEuler/yocto-meta-openeuler[2203 sp3]Sensitive words exist and need to be confirmed.https://gitee.com/openeuler/kernel/issues/I8Q22T
      I8Q2BWsrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]When PWR_CPU_SetFreqRange is called to set the maximum and minimum values out of the range, the error code 6 is returned.https://gitee.com/openeuler/kernel/issues/I8Q2BW
      I8Q44NopenEuler/yocto-meta-openeuler[2203 sp3]The Shell Scripts item in the performance test decreases greatly.https://gitee.com/openeuler/kernel/issues/I8Q44N
      I8Q50Rsrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]When the gov is set to userspace and PWR_CPU_GetFreqGovAttrs is called (the current gov does not have attributes), the error code 503 is returned.https://gitee.com/openeuler/kernel/issues/I8Q50R
      I8Q5BFsrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]When PWR_CPU_GetFreqGovAttr is called to obtain an attribute that does not exist, the error code 13 is returned.https://gitee.com/openeuler/kernel/issues/I8Q5BF
      I8Q6R0src-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]When the gov is set to ondemand, the io_is_busy io_is_busyabc attribute fails to be set by calling PWR_CPU_SetFreqGovAttr. Then the attribute value obtained by calling PWR_CPU_GetFreqGovAttr is different from the original value.https://gitee.com/openeuler/kernel/issues/I8Q6R0
      I8Q7QJsrc-openEuler/aops-apollo[22.03-LTS-SP3-RC4][arm/x86][Aops]Target Version Is Incorrectly Displayed After Hot Patch acc1- > Hot Patch acc2 Is Rolled Backhttps://gitee.com/openeuler/kernel/issues/I8Q7QJ
      I8Q83Rsrc-openEuler/gcc[22.03 SP3 RC4][codedb] ICE:lto1: internal compiler error: Segmentation fault(during IPA pass: sra) Is Reported When SQLite Is Compiled Using the -O3 -flto -flto-partition=one -ficp -fipa-prefetch Optionhttps://gitee.com/openeuler/kernel/issues/I8Q83R
      I8Q84Rsrc-openEuler/gcc[22.03 SP3 RC4][codedb] ICE:lto1:lto1: internal compiler error(during IPA pass: ipa_prefetch,at ipa-prefetch.c:700) Is Reported When SQLite Is Compiled Using the -O3 -flto -flto-partition=one -fipa-prefetch -fipa-ic Optionhttps://gitee.com/openeuler/kernel/issues/I8Q84R
      I8QAF8src-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]The printed information of the registration interface is inconsistent when the log callback function is not set and when the log callback function is set.https://gitee.com/openeuler/kernel/issues/I8QAF8
      I8QAFFopenEuler/yocto-meta-openeuler[2203 sp3]ok3568 compilation errorhttps://gitee.com/openeuler/kernel/issues/I8QAFF
      I8QBH9src-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]If log callback is not set, the operation type printed by invoking the PWR_RequestControlAuth interface is incorrect.https://gitee.com/openeuler/kernel/issues/I8QBH9
      I8QC2Isrc-openEuler/gcc[22.03 SP3 RC4][codedb] ICE:lto1: internal compiler error: Segmentation fault(during IPA pass: ipa_prefetch) Is Reported When the -O3 -flto -flto-partition=one -fipa-prefetch Option Configure Freetype Is Appliedhttps://gitee.com/openeuler/kernel/issues/I8QC2I
      I8QC6KopenEuler/kernel[22.03-SP3-rc4][arm]Local self-compilation of the kernel-64kb source code package fails because the check-kabi file is missing.https://gitee.com/openeuler/kernel/issues/I8QC6K
      I8QC8Osrc-openEuler/gcc[22.03 SP3 RC4][codedb] ICE:lto1: internal compiler error(during IPA pass: ipa_prefetch,at tree.h:4523) Is Reported When freetype Is Compiled Using the -O3 -flto -flto-partition=one -fipa-prefetch -fipa-ic Optionhttps://gitee.com/openeuler/kernel/issues/I8QC8O
      I8QCBUsrc-openEuler/aops-hermes[22.03-LTS-SP3-RC4][arm/x86][Aops]When Hosts Are Added in Batches, the ssh_pkey Field Is Missing, and a Message Is Displayed Indicating that Some Hosts Are Successfully Addedhttps://gitee.com/openeuler/kernel/issues/I8QCBU
      I8QCJRsrc-openEuler/aops-hermes[22.03-LTS-SP3-RC4][arm/x86][Aops]The file that is successfully submitted last time is displayed on the page for adding hosts in batches.https://gitee.com/openeuler/kernel/issues/I8QCJR
      I8QD9Hsrc-openEuler/gcc[22.03 SP3 RC4][codedb] ICE:internal compiler error(during GIMPLE pass: vrp,at tree-ssa-loop-manip.c:247) Is Reported When Velvet Is Compiled Using the -O3 -flto -flto-partition=one -fipa-prefetch -fipa-ic Optionhttps://gitee.com/openeuler/kernel/issues/I8QD9H
      I8QEQRsrc-openEuler/gcc[22.03 SP3 RC4][codedb] ICE:internal compiler error(during RTL pass: split_complex_instructions,at sched-rgn.c:4351) Is Reported When Mariadb Is Compiled Using the -O3 -fsplit-ldp-stp Optionhttps://gitee.com/openeuler/kernel/issues/I8QEQR
      I8QFEEsrc-openEuler/gcc[22.03 SP3 RC4][codedb] ICE:internal compiler error(during RTL pass: ce1, at ifcvt.c:2184) Is Reported When llvm-12 Is Compiled Using the -O2 -fifcvt-allow-complicated-cmps --param=ifcvt-allow-register-renaming=2 Optionhttps://gitee.com/openeuler/kernel/issues/I8QFEE
      I8QFV9openEuler/yocto-meta-openeuler[2203 sp3]isula run errorhttps://gitee.com/openeuler/kernel/issues/I8QFV9
      I8QI20src-openEuler/syscare[22.03-LTS-SP3-RC4][arm/x86]Hot Patch Repair + Cold Patch Incorporation. After the Server Is Restarted, the Hot Patch Status Is Acceptedhttps://gitee.com/openeuler/kernel/issues/I8QI20
      I8QI6Usrc-openEuler/isula-buildThe isula-build Service Is Not Cleared After yum remove isula-build Is Executedhttps://gitee.com/openeuler/kernel/issues/I8QI6U
      I8QLYIsrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]Modify the sock path configuration and restart the service. When the client invokes the PWR_SetServerInfo interface as a common user (with the admin permission), the error message "Server sock doesn't exist." is displayed.Check server addr path please.https://gitee.com/openeuler/kernel/issues/I8QLYI
      I8QMM1src-openEuler/aops-diana[22.03-LTS-SP3-RC4][arm/x86][Aops]Failed to Start the aops-diana Servicehttps://gitee.com/openeuler/kernel/issues/I8QMM1
      I8QNN6src-openEuler/aops-hermes[22.03-LTS-SP3-RC4][arm/x86][Aops]When a user selects a host during workflow creation, the host IP address is not displayed.https://gitee.com/openeuler/kernel/issues/I8QNN6
      I8QNOBsrc-openEuler/powerapi[openEuler-22.03-LTS-SP3-RC3][arm/x86]A created common user is not configured in pwrapis_config.ini. When the user calls RequestControlAuth "[ERROR] Recv error Connection reset by peer errno: 104" is reported, and the error code is 1.https://gitee.com/openeuler/kernel/issues/I8QNOB
      I8QNYIsrc-openEuler/aops-ceres[22.03-LTS-SP3-RC4][arm/x86][Aops]After the cold patch task is recovered, the host is not restarted. A rollback task is performed, and only the boot kernel version is switched.https://gitee.com/openeuler/kernel/issues/I8QNYI
      I8QXIAsrc-openEuler/opencv[EulerMaker] opencv build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8QXIA
      I8R6RJsrc-openEuler/arkui-linux[EulerMaker] arkui-linux build problem in openEuler-22.03-LTS-SP3:epolhttps://gitee.com/openeuler/kernel/issues/I8R6RJ
      I8RE9Esrc-openEuler/aops-hermes[22.03-LTS-SP3-RC5][arm/x86][Aops]The message displayed in the dialog box for generating a repair task is incorrect.https://gitee.com/openeuler/kernel/issues/I8RE9E
      I8RKFJsrc-openEuler/gcc[22.03 SP3 RC5][bs_test]ICE:during IPA pass: icp Is Reported During -O3 -fwhole-program -ficp Option Compilationhttps://gitee.com/openeuler/kernel/issues/I8RKFJ
      I8RP4Hsrc-openEuler/gcc[22.03 SP3 RC5][codedb] lto1: internal compiler error: Segmentation fault(during IPA pass: icp) Is Reported When llvm-12 Is Compiled Using the -O3 -flto -flto-partition=one -fipa-ic Optionhttps://gitee.com/openeuler/kernel/issues/I8RP4H
      I8RP6Jsrc-openEuler/gazelle[22.03 sp3 RC5]A segment error is reported during the gazelle acceleration MySQL test.https://gitee.com/openeuler/kernel/issues/I8RP6J
      I8RPL1src-openEuler/cri-o[22.03 LTS SP3 round5][arm\x86]A conflict message is displayed during cri-o downgrade.https://gitee.com/openeuler/kernel/issues/I8RPL1
      I8RPUAsrc-openEuler/dde[22.03 LTS SP3 round5][arm\x86]Failed to degrade the dde.https://gitee.com/openeuler/kernel/issues/I8RPUA
      I8RRDWsrc-openEuler/gcc[22.03 SP3 RC5][codedb] internal compiler error: Segmentation fault( during RTL pass: crypto_accel) Is Reported When MariaDB 10.3.8 Is Compiled Using the -O3 -fcrypto-accel-aes Optionhttps://gitee.com/openeuler/kernel/issues/I8RRDW
      I8RURAsrc-openEuler/gcc[22.03 SP3 RC5][codedb] ICE:internal compiler error(during IPA pass: inline,at calls.c:855) Is Reported During Greenplum Compilation Using the -O3 -flto -flto-partition=one -fipa-prefetch Optionhttps://gitee.com/openeuler/kernel/issues/I8RURA
      I8RV7Tsrc-openEuler/gcc[22.03 SP3 RC5][codedb] internal compiler error: Segmentation fault( during IPA pass: ipa_prefetch) Is Reported When SU2_7 Is Compiled Using the -O3 -flto -flto-partition=one -fipa-prefetch Optionhttps://gitee.com/openeuler/kernel/issues/I8RV7T
      I8RVECsrc-openEuler/gcc[22.03 SP3 RC5][codedb] ICE: internal compiler error: Segmentation fault(during IPA pass: inline) Is Reported When Wtdbg2 Is Compiled Using the -O3 -flto -flto-partition=one -fipa-prefetch Optionhttps://gitee.com/openeuler/kernel/issues/I8RVEC

      Bug Catching

      Buggy Content

      Bug Description

      Submit As Issue

      It's a little complicated....

      I'd like to ask someone.

      PR

      Just a small problem.

      I can fix it online!

      Bug Type
      Specifications and Common Mistakes

      ● Misspellings or punctuation mistakes;

      ● Incorrect links, empty cells, or wrong formats;

      ● Chinese characters in English context;

      ● Minor inconsistencies between the UI and descriptions;

      ● Low writing fluency that does not affect understanding;

      ● Incorrect version numbers, including software package names and version numbers on the UI.

      Usability

      ● Incorrect or missing key steps;

      ● Missing prerequisites or precautions;

      ● Ambiguous figures, tables, or texts;

      ● Unclear logic, such as missing classifications, items, and steps.

      Correctness

      ● Technical principles, function descriptions, or specifications inconsistent with those of the software;

      ● Incorrect schematic or architecture diagrams;

      ● Incorrect commands or command parameters;

      ● Incorrect code;

      ● Commands inconsistent with the functions;

      ● Wrong screenshots.

      Risk Warnings

      ● Lack of risk warnings for operations that may damage the system or important data.

      Content Compliance

      ● Contents that may violate applicable laws and regulations or geo-cultural context-sensitive words and expressions;

      ● Copyright infringement.

      How satisfied are you with this document

      Not satisfied at all
      Very satisfied
      Submit
      Click to create an issue. An issue template will be automatically generated based on your feedback.
      Bug Catching
      编组 3备份