部署 Node 节点组件

本章节仅以k8snode1节点为例。

环境准备

# 内网需要配置代理
$ dnf install -y docker iSulad conntrack-tools socat containernetworking-plugins
$ swapoff -a
$ mkdir -p /etc/kubernetes/pki/
$ mkdir -p /etc/cni/net.d
$ mkdir -p /opt/cni
# 删除默认kubeconfig
$ rm /etc/kubernetes/kubelet.kubeconfig

## 使用isulad作为运行时 ########
# 配置iSulad
cat  /etc/isulad/daemon.json
{
        "registry-mirrors": [
                "docker.io"
        ],
        "insecure-registries": [
                "k8s.gcr.io",
                "quay.io"
        ],
        "pod-sandbox-image": "k8s.gcr.io/pause:3.2",# pause类型
        "network-plugin": "cni", # 置空表示禁用cni网络插件则下面两个路径失效， 安装插件后重启isulad即可
        "cni-bin-dir": "/usr/libexec/cni/",
        "cni-conf-dir": "/etc/cni/net.d",
}

# 在iSulad环境变量中添加代理，下载镜像
cat /usr/lib/systemd/system/isulad.service
[Service]
Type=notify
Environment="HTTP_PROXY=http://name:password@proxy:8080"
Environment="HTTPS_PROXY=http://name:password@proxy:8080"

# 重启iSulad并设置为开机自启
systemctl daemon-reload
systemctl restart isulad




## 如果使用docker作为运行时 ########
$ dnf install -y docker
# 如果需要代理的环境，可以给docker配置代理，新增配置文件http-proxy.conf，并编写如下内容，替换name，password和proxy-addr为实际的配置。
$ cat /etc/systemd/system/docker.service.d/http-proxy.conf
[Service]
Environment="HTTP_PROXY=http://name:password@proxy-addr:8080"
$ systemctl daemon-reload
$ systemctl restart docker

创建 kubeconfig 配置文件

对各节点依次如下操作创建配置文件：

$ kubectl config set-cluster openeuler-k8s \
    --certificate-authority=/etc/kubernetes/pki/ca.pem \
    --embed-certs=true \
    --server=https://192.168.122.154:6443 \
    --kubeconfig=k8snode1.kubeconfig

$ kubectl config set-credentials system:node:k8snode1 \
    --client-certificate=/etc/kubernetes/pki/k8snode1.pem \
    --client-key=/etc/kubernetes/pki/k8snode1-key.pem \
    --embed-certs=true \
    --kubeconfig=k8snode1.kubeconfig

$ kubectl config set-context default \
    --cluster=openeuler-k8s \
    --user=system:node:k8snode1 \
    --kubeconfig=k8snode1.kubeconfig

$ kubectl config use-context default --kubeconfig=k8snode1.kubeconfig

注：修改k8snode1为对应节点名

拷贝证书

和控制面一样，所有证书、密钥和相关配置都放到/etc/kubernetes/pki/目录。

$ ls /etc/kubernetes/pki/
ca.pem                 k8snode1.kubeconfig  kubelet_config.yaml     kube-proxy-key.pem     kube-proxy.pem
k8snode1-key.pem  k8snode1.pem         kube_proxy_config.yaml  kube-proxy.kubeconfig

CNI 网络配置

先通过 containernetworking-plugins 作为 kubelet 使用的 cni 插件，后续可以引入 calico，flannel 等插件，增强集群的网络能力。

# 桥网络配置
$ cat /etc/cni/net.d/10-bridge.conf
{
  "cniVersion": "0.3.1",
  "name": "bridge",
  "type": "bridge",
  "bridge": "cnio0",
  "isGateway": true,
  "ipMasq": true,
  "ipam": {
    "type": "host-local",
    "subnet": "10.244.0.0/16",
    "gateway": "10.244.0.1"
  },
  "dns": {
    "nameservers": [
      "10.244.0.1"
    ]
  }
}

# 回环网络配置
$ cat /etc/cni/net.d/99-loopback.conf
{
    "cniVersion": "0.3.1",
    "name": "lo",
    "type": "loopback"
}

部署 kubelet 服务

kubelet 依赖的配置文件

$ cat /etc/kubernetes/pki/kubelet_config.yaml
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
authentication:
  anonymous:
    enabled: false
  webhook:
    enabled: true
  x509:
    clientCAFile: /etc/kubernetes/pki/ca.pem
authorization:
  mode: Webhook
clusterDNS:
- 10.32.0.10
clusterDomain: cluster.local
runtimeRequestTimeout: "15m"
tlsCertFile: "/etc/kubernetes/pki/k8snode1.pem"
tlsPrivateKeyFile: "/etc/kubernetes/pki/k8snode1-key.pem"

注意：clusterDNS 的地址为：10.32.0.10，必须和之前设置的 service-cluster-ip-range 一致

编写 systemd 配置文件

$ cat /usr/lib/systemd/system/kubelet.service
[Unit]
Description=kubelet: The Kubernetes Node Agent
Documentation=https://kubernetes.io/docs/
Wants=network-online.target
After=network-online.target

[Service]
ExecStart=/usr/bin/kubelet \
	--config=/etc/kubernetes/pki/kubelet_config.yaml \
	--network-plugin=cni \
	--pod-infra-container-image=k8s.gcr.io/pause:3.2 \
	--kubeconfig=/etc/kubernetes/pki/k8snode1.kubeconfig \
	--register-node=true \
	--hostname-override=k8snode1 \
	--cni-bin-dir="/usr/libexec/cni/" \
	--v=2

Restart=always
StartLimitInterval=0
RestartSec=10

[Install]
WantedBy=multi-user.target

注意：如果使用isulad作为runtime，需要增加如下配置

--container-runtime=remote \
--container-runtime-endpoint=unix:///var/run/isulad.sock \

部署 kube-proxy

kube-proxy 依赖的配置文件

cat /etc/kubernetes/pki/kube_proxy_config.yaml
kind: KubeProxyConfiguration
apiVersion: kubeproxy.config.k8s.io/v1alpha1
clientConnection:
  kubeconfig: /etc/kubernetes/pki/kube-proxy.kubeconfig
clusterCIDR: 10.244.0.0/16
mode: "iptables"

编写 systemd 配置文件

$ cat /usr/lib/systemd/system/kube-proxy.service
[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://kubernetes.io/docs/reference/generated/kube-proxy/
After=network.target

[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/proxy
ExecStart=/usr/bin/kube-proxy \
	    $KUBE_LOGTOSTDERR \
	    $KUBE_LOG_LEVEL \
	    --config=/etc/kubernetes/pki/kube_proxy_config.yaml \
	    --hostname-override=k8snode1 \
	    $KUBE_PROXY_ARGS
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

启动组件服务

$ systemctl enable kubelet kube-proxy
$ systemctl start kubelet kube-proxy

其他节点依次部署即可。

验证集群状态

等待几分钟，使用如下命令查看node状态：

$ kubectl get nodes --kubeconfig /etc/kubernetes/pki/admin.kubeconfig
NAME            STATUS   ROLES    AGE   VERSION
k8snode1   Ready    <none>   17h   v1.20.2
k8snode2   Ready    <none>   19m   v1.20.2
k8snode3   Ready    <none>   12m   v1.20.2

部署 coredns

coredns可以部署到node节点或者master节点，本文这里部署到节点k8snode1。

编写 coredns 配置文件

$ cat /etc/kubernetes/pki/dns/Corefile
.:53 {
    errors
    health {
      lameduck 5s
    }
    ready
    kubernetes cluster.local in-addr.arpa ip6.arpa {
      pods insecure
      endpoint https://192.168.122.154:6443
      tls /etc/kubernetes/pki/ca.pem /etc/kubernetes/pki/admin-key.pem /etc/kubernetes/pki/admin.pem
      kubeconfig /etc/kubernetes/pki/admin.kubeconfig default
      fallthrough in-addr.arpa ip6.arpa
    }
    prometheus :9153
    forward . /etc/resolv.conf {
      max_concurrent 1000
    }
    cache 30
    loop
    reload
    loadbalance
}

说明：

监听53端口；
设置kubernetes插件配置：证书、kube api的URL；

准备 systemd 的 service 文件

cat /usr/lib/systemd/system/coredns.service
[Unit]
Description=Kubernetes Core DNS server
Documentation=https://github.com/coredns/coredns
After=network.target

[Service]
ExecStart=bash -c "KUBE_DNS_SERVICE_HOST=10.32.0.10 coredns -conf /etc/kubernetes/pki/dns/Corefile"

Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

启动服务

$ systemctl enable coredns
$ systemctl start coredns

创建 coredns 的 Service 对象

$ cat coredns_server.yaml
apiVersion: v1
kind: Service
metadata:
  name: kube-dns
  namespace: kube-system
  annotations:
    prometheus.io/port: "9153"
    prometheus.io/scrape: "true"
  labels:
    k8s-app: kube-dns
    kubernetes.io/cluster-service: "true"
    kubernetes.io/name: "CoreDNS"
spec:
  clusterIP: 10.32.0.10
  ports:
  - name: dns
    port: 53
    protocol: UDP
  - name: dns-tcp
    port: 53
    protocol: TCP
  - name: metrics
    port: 9153
    protocol: TCP

创建 coredns 的 endpoint 对象

$ cat coredns_ep.yaml
apiVersion: v1
kind: Endpoints
metadata:
  name: kube-dns
  namespace: kube-system
subsets:
  - addresses:
      - ip: 192.168.122.157
    ports:
      - name: dns-tcp
        port: 53
        protocol: TCP
      - name: dns
        port: 53
        protocol: UDP
      - name: metrics
        port: 9153
        protocol: TCP

确认 coredns 服务

# 查看service对象
$ kubectl get service -n kube-system kube-dns
NAME       TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)                  AGE
kube-dns   ClusterIP   10.32.0.10   <none>        53/UDP,53/TCP,9153/TCP   51m
# 查看endpoint对象
$ kubectl get endpoints -n kube-system kube-dns
NAME       ENDPOINTS                                                    AGE
kube-dns   192.168.122.157:53,192.168.122.157:53,192.168.122.157:9153   52m

部署 Node 节点组件

环境准备

创建 kubeconfig 配置文件

拷贝证书

CNI 网络配置

部署 kubelet 服务

kubelet 依赖的配置文件

编写 systemd 配置文件

部署 kube-proxy

kube-proxy 依赖的配置文件

编写 systemd 配置文件

启动组件服务

验证集群状态

部署 coredns

编写 coredns 配置文件

准备 systemd 的 service 文件

启动服务

创建 coredns 的 Service 对象

创建 coredns 的 endpoint 对象

确认 coredns 服务

文档捉虫

“有虫”文档片段

问题描述

您对文档的总体满意度